FAQ for Battery Cables Repair
Q: What is the removal procedure for the battery negative cable?
A:
The procedure is to disconnect the negative battery cable, remove the rear compartment carpet, remove the passenger rear compartment front side trim panel, remove the negative cable ground bolt from the chassis and then remove the negative battery cable.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the battery positive and negative cable?
A:
The procedure is to install the positive battery cable, place the negative battery cable, install the battery positive/negative cable to the engine bolt, place the battery ground cable, place the battery positive cable, connect the positive cable lead and then connect the negative cable lead to the battery.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the battery positive cable?
A:
The procedure is to install the right door sill plate, the passenger rear compartment, the rear compartment carpet, the positive cable lead, and the positive battery cable nut.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the battery-positive fuse block cable?
A:
The procedure is to remove the battery tray, the positive battery cable nut, the positive battery cable lead from the stud, the battery positive fuse block cable, the kick-up panel, the instrument panel (I/P) wiring harness junction block nut, and the battery positive fuse block cable from the stud.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the battery negative cable?
A:
The procedure is to install the negative battery cable, install the negative cable ground bolt to the chassis, install the passenger rear compartment front side trim panel, install the rear compartment carpet and then connect the negative battery cable.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the positive battery cable to the starter solenoid nut?
A:
The recommended torque is 10 N.m (89 lb in).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the battery positive and negative cable?
A:
The procedure is to disconnect the negative cable lead from the battery, disconnect the positive cable lead, remove the battery positive cable to fuse/relay center nut and disconnect the cable, raise and support the vehicle, remove the battery positive/negative cable, remove the positive battery cable to starter solenoid nut and disconnect the cable and then remove the battery positive/negative cable from the vehicle.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the I/P wiring harness junction block nut?
A:
The recommended torque is 10 N.m (89 lb in).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the battery-positive cable?
A:
The procedure is to remove the rear compartment carpet, the passenger rear compartment front side trim panel, the right door sill plate, the positive battery cable retainers, the positive battery cable nut, the positive battery cable lead, the positive battery cable grommet, and the positive battery cable.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the positive battery cable nut?
A:
The recommended torque is 10 N.m (89 lb in).
By BobGM Specialist
01/11/2022 See more FAQs (6)