< Back ×
1985 Ford Ranger Driveshaft
My Vehicle Change Vehicle
1985 Ford Ranger
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
$25.64 MSRP:$36.85You Save: $11.21 (31%)Product Specifications- Notes: Bronco Ii, Ranger; 7.5" Ring Gear
- Other Names: Pinion Gear Shaft, Pinion Shaft, Shaft
- Item Dimensions: 6.2 x 1.8 x 1.6 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Ford Ranger Pinion Gear Shaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Notes: with 39-13/16" (1011 mm) Long Driveshaft;Short Wheelbase;Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: Yes
- Length: 39.812"
- Length (mm): 1011,237
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1985 Ford Ranger Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1985 Ford Ranger | All Trims | 4 Cyl 2.3L
- 1985 Ford Ranger | All Trims | 6 Cyl 2.8L
Product Specifications- Notes: Short Wheelbase;with 44-1/4" (1123 mm) Long Driveshaft;Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: Yes
- Length: 44.25"
- Length (mm): 1123
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1985 Ford Ranger Remanufactured Driveshafts
Vehicle Fitment- 1985 Ford Ranger | All Trims | 4 Cyl 2.3L
- 1985 Ford Ranger | All Trims | 6 Cyl 2.8L
Product Specifications- Notes: Short Wheelbase;with 42-5/16" (1074 mm) Long Driveshaft;Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: Yes
- Length: 42.312"
- Length (mm): 1074
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1985 Ford Ranger Remanufactured Driveshafts
Vehicle Fitment- 1985 Ford Ranger | All Trims | 4 Cyl 2.3L
- 1985 Ford Ranger | All Trims | 6 Cyl 2.8L
- Product Specifications
- Notes: Bronco Ii, Ranger; Right; 4WD
- Location: Passenger Side
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, Splash, Sport, STX, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Bronco Ii, Ranger; Left; 4WD
- Location: Driver Side
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, Splash, Sport, STX, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: 6.7 Gear
- Location: Driver Side; Passenger Side
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
- Product Specifications
- Notes: Bronco Ii, Ranger; 7.5" Ring Gear; Right Side; 7.5" Ring Gear
- Location: Passenger Side
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1985 Ford Ranger Axle
PartNumber: E3TZ-4234-CProduct Specifications- Notes: Bronco Ii, Ranger; 7.5" Ring Gear; Left Side; 7.5" Ring Gear
- Location: Driver Side
- Other Names: Axle, Axle Shaft
- Item Dimensions: 40.8 x 8.3 x 8.3 inches
- Item Weight: 8.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Ford Ranger Axle
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Bronco Ii, Ranger; 8.8" Ring Gear; Right Side
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Bronco Ii, Ranger; 8.8" Ring Gear; Left Side
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Ranger; 2.8l; 108" Wheelbase
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, S, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
- Product Specifications
- Notes: 2WD, From 6/83; Bronco Ii, Ranger; Right
- Location: Passenger Side
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: 2WD, From 6/83; Bronco Ii, Ranger; Left
- Location: Driver Side
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Ranger; 2.0l, 2.3l; 114" Wheelbase
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS
- Product Specifications
- Notes: Ranger; 2.8l; 114" Wheelbase
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, S, XL, XLS, XLT | 6 Cyl 2.8 L GAS
- Product Specifications
- Notes: Ranger; 2.0l, 2.3l; 108" Wheelbase
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Ranger; 2.0l, 2.3l; 114" Wheelbase;Ranger; 2.8l; 114" Wheelbase
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
- Product Specifications
- Notes: Bronco Ii; 2.3l
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, S, STX, XL, XLS, XLT | 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS
- Product Specifications
- Notes: Ranger; 2.0l, 2.3l; 108" Wheelbase;Ranger; 2.8l; 108" Wheelbase
- Part Description: 1985 Ford Ranger Driveshaft
Vehicle Fitment- 1985 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS