< Back ×
1988 Ford Bronco Driveshaft
My Vehicle Change Vehicle
1988 Ford Bronco
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Product Specifications- Notes: with 39-1/2" (1003 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 39.5"
- Length (mm): 1003,3
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1988 Ford Bronco Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1988 Ford Bronco | All Trims | All Engines
Product Specifications- Notes: with 38" (965 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: Yes
- Length: 38"
- Length (mm): 965
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1988 Ford Bronco Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1988 Ford Bronco | All Trims | All Engines
Product Specifications- Notes: Bronco; Left Side
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 39.3 x 8.6 x 8.5 inches
- Item Weight: 27.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Ford Bronco Axle Shafts
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite, XLT Sport | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
Product Specifications- Notes: Bronco; Right Side
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 40.8 x 8.6 x 8.4 inches
- Item Weight: 24.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: F7UZ-4234-BA
- Part Description: 1988 Ford Bronco Axle Shafts
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite, XLT Sport | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Product Specifications
- Notes: W/Automatic Locking; Bronco; Left; Auto Hubs
- Location: Driver Side
- Part Description: 1988 Ford Bronco Driveshaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Nite | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
Product Specifications- Notes: with 4.10 Axle Ratio;with 26-1/2" (673 mm) Long Driveshaft;with 3.08 Axle Ratio;with 3.55 Axle Ratio;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 26.5"
- Length (mm): 673,1
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1988 Ford Bronco Remanufactured Driveshafts
Vehicle Fitment- 1988 Ford Bronco | All Trims | 6 Cyl 4.9L
- 1988 Ford Bronco | All Trims | 8 Cyl 5.0L
- Product Specifications
- Other Names: Shaft
- Item Dimensions: 27.8 x 5.4 x 13.4 inches
- Item Weight: 16.50 Pounds
- Part Description: 1988 Ford Bronco Outer Shaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite, XLT Sport | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
Product Specifications- Notes: with 33-1/4" (844 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 33.25"
- Length (mm): 844
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1988 Ford Bronco Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1988 Ford Bronco | All Trims | All Engines
- Product Specifications
- Notes: W/Automatic Locking; Bronco; Right; Auto Hubs
- Location: Passenger Side
- Part Description: 1988 Ford Bronco Driveshaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Nite | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Product Specifications
- Notes: Bronco; Manual Hubs
- Part Description: 1988 Ford Bronco Driveshaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite, XLT Sport | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Product Specifications
- Notes: Bronco; W/O 10.25 Ring Gear; Right Side
- Part Description: 1988 Ford Bronco Driveshaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Nite | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Product Specifications
- Notes: Bronco; W/O 10.25 Ring Gear; Left Side
- Part Description: 1988 Ford Bronco Driveshaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Nite | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Product Specifications
- Notes: Bronco; W/10.25 Ring Gear; Right Side
- Part Description: 1988 Ford Bronco Driveshaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Product Specifications
- Notes: Bronco; W/10.25 Ring Gear; Left Side
- Part Description: 1988 Ford Bronco Driveshaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Product Specifications
- Notes: W/Manual Locking; Bronco; Right; Manual Hubs
- Location: Passenger Side
- Part Description: 1988 Ford Bronco Driveshaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Nite | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Product Specifications
- Notes: W/Manual Locking; Bronco; Left; Manual Hubs
- Location: Driver Side
- Part Description: 1988 Ford Bronco Driveshaft
Vehicle Fitment- 1988 Ford Bronco | Custom, Eddie Bauer, XL, XLT, XLT Nite | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS