< Back ×
1990 Jeep Comanche Driveshaft
My Vehicle Change Vehicle
1990 Jeep Comanche
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1990 Jeep Comanche
PartNumber: 65-9776$300.99Product Specifications- Notes: with Dana Model 30 Axle;with 242 Transfer Case;with 30-1/2" (774 mm) Long Driveshaft;with 231 Transfer Case;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 30.5"
- Length (mm): 774
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1990 Jeep Comanche Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1990 Jeep Comanche | All Trims | 6 Cyl 4.0L
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1990 Jeep Comanche
PartNumber: 65-9668$238.96Product Specifications- Notes: with 231 Transfer Case;with Dana Model 30 Axle;with 30-11/16" (779 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 30.687"
- Length (mm): 779,462
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1990 Jeep Comanche Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1990 Jeep Comanche | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: 4WD, Part Time Axle, Universal Joint Type; Cardan Joint; Right; W/Vacuum Disconnect
- Location: Passenger Side
- Other Names: Axle Assembly, Axle Shaft
- Part Description: 1990 Jeep Comanche Front Axle Shaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Notes: 4WD, Full Time Axle, Universal Joint Type, W/O ABS; Cardan Joint; Right; W/O Vacuum Disconnect
- Location: Passenger Side
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 43.4 x 5.6 x 5.5 inches
- Item Weight: 18.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Jeep Comanche Axle Shaft Assembly
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: 4WD, Full Time Axle, Universal Joint Type, W/O ABS; 4WD, Part Time Axle, Universal Joint Type; Cardan Joint; Left
- Location: Driver Side
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 32.6 x 6.4 x 6.5 inches
- Item Weight: 11.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Jeep Comanche Axle Shaft Assembly
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Pick Up, Standard
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Weight: 18.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Jeep Comanche Right Rear Axle Shaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Eliminator, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Notes: with 231 Transfer Case;with Dana Model 30 Axle;Sell Out and Reorder 65-9776;with 30-11/16" (779 mm) Long Driveshaft;with 242 Transfer Case;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: Yes
- Length: 30.6875; 779.4625
- Measurement Method: Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft.
- Product Condition: Remanufactured
- Tubing Outer Diameter: 2.01; 50.93
- UPC: 082617563185
- Part Description: 1990 Jeep Comanche Remanufactured Driveshafts
Vehicle Fitment- 1990 Jeep Comanche | All Trims | 6 Cyl 4.0L
Product Specifications- Notes: 4WD, Full Time Axle; 4WD, Part Time Axle
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly, Outer Shaft
- Fitment Type: Direct Replacement
- Part Description: 1990 Jeep Comanche Shaft-Stub
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Notes: with Dana Model 30 Axle;with 231 Transfer Case;with 28" (711 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 28"
- Length (mm): 711,2
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1990 Jeep Comanche Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1990 Jeep Comanche | All Trims | 4 Cyl 2.5L
- Product Specifications
- Notes: 2WD
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: 4WD, Part Time Axle
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Eliminator, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Pick Up, Dana 44 Heavy Duty
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Eliminator, Laredo, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Pick Up, Dana 35 Standard
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Eliminator, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Pick Up, Standard
- Location: Driver Side
- Other Names: Axle Shaft
- Item Weight: 20.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Jeep Comanche Axle Shaft Right
Vehicle Fitment- 1990 Jeep Comanche | Base, Eliminator, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: CV Joint Type; Left
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: CV Joint Type; Right; W/Vacuum Disconnect
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: CV Joint Type; Right; W/O Vacuum Disconnect
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1990 Jeep Comanche Axle Shaft Kit Rear Passenger Right Siderh Hand
PartNumber: 83502882Product Specifications- Notes: Truck; Mj Series; Right
- Other Names: Axle Shaft
- Item Dimensions: 31.6 x 6.7 x 6.1 inches
- Item Weight: 18.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Jeep Comanche Axle Shaft Kit Rear Passenger Right Siderh Hand
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Truck; Mj Series; Left
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Pick Up, Hd
- Location: Passenger Side
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Pick Up, Hd
- Location: Driver Side
- Other Names: Axle Shaft
- Fitment Type: Direct Replacement
- Part Description: 1990 Jeep Comanche Axle Shaft Rear Left
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: 4WD, Full Time Axle, Universal Joint Type, W/ABS
- Location: Passenger Side
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Eliminator, Laredo, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: 4WD, Full Time Axle, Universal Joint Type, W/ABS
- Location: Driver Side
- Part Description: 1990 Jeep Comanche Driveshaft
Vehicle Fitment- 1990 Jeep Comanche | Base, Chief, Eliminator, Laredo, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS