< Back ×
1996 Toyota 4Runner Driveshaft
My Vehicle Change Vehicle
1996 Toyota 4Runner
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
$585.34Product Specifications- Drive Shaft Diameter (In): 3"
- Drive Shaft Wall Thickness (In): 0.065"
- Greaseable Drive Shaft: No
- Length: 62.75"
- Material: Steel
- OE Part Number: 371103D070
- Outside Diameter: 3"
- Overall Length Adjustable: No
- Product Condition: New
- Transmission Type: Automatic
- UPC: 037495118286
- Wall Thickness: 0.065"
- Part Description: 1996 Toyota 4Runner OE Solutions Rear Driveshaft
Vehicle Fitment- 1996 Toyota 4Runner | All Trims | 6 Cyl 3.4L
$478.70Product Specifications- Notes: with 46-7/8" (1191 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face;Supplied as new
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: Yes
- Length (in): 46.875
- Length (mm): 1191
- Measurement Method: Measurement Taken from End of Flange Face to End of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 2.71
- Tubing Outer Diameter (mm): 68.9
- Part Description: 1996 Toyota 4Runner Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1996 Toyota 4Runner | All Trims | 4 Cyl 2.7L
$549.93Product Specifications- Notes: with 24-1/4" (616 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face
- Greasable: Yes
- Length: 24.25"
- Length (mm): 615,95
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1996 Toyota 4Runner Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1996 Toyota 4Runner | All Trims | 4 Cyl 2.7L
$351.23Product Specifications- Notes: with 60-5/8" (1540 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: Yes
- Length (in): 60.625
- Length (mm): 1540
- Measurement Method: Measurement Taken from End of Input Shaft to End of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 3.25
- Tubing Outer Diameter (mm): 83
- Part Description: 1996 Toyota 4Runner Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1996 Toyota 4Runner | All Trims | 6 Cyl 3.4L
$512.02Product Specifications- Notes: with 58-11/16" (1490 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: Yes
- Length (in): 58.687
- Length (mm): 1490
- Measurement Method: Measurement Taken from End of Input Shaft to End of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 3.25
- Tubing Outer Diameter (mm): 83
- Part Description: 1996 Toyota 4Runner Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1996 Toyota 4Runner | All Trims | 4 Cyl 2.7L
$437.19 MSRP:$644.70You Save: $207.51 (33%)Product Specifications- Notes: 2.7 Liter W/ABS, W/15" Wheel
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 30.4 x 7.9 x 6.8 inches
- Item Weight: 15.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Axle Shafts
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$447.12 MSRP:$659.34You Save: $212.22 (33%)Product Specifications- Notes: 2.7 Liter W/ABS, W/16" Wheel;3.4 Liter, W/ABS
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 40.8 x 8.6 x 8.6 inches
- Item Weight: 22.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Axle Shafts
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$439.79 MSRP:$648.52You Save: $208.73 (33%)Product Specifications- Notes: 4-Runner; 4 Cylinder; 2WD; Auto Trans
- Other Names: Drive Shaft
- Item Dimensions: 34.7 x 6.9 x 5.4 inches
- Item Weight: 14.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Drive Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
$170.13 MSRP:$247.16You Save: $77.03 (32%)Product Specifications- Notes: 4-Runner
- Other Names: Intermed Shaft, Shaft, Stub Shaft
- Item Dimensions: 18.7 x 2.9 x 2.9 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Intermed Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$184.44 MSRP:$267.95You Save: $83.51 (32%)Product Specifications- Notes: 4-Runner; W/Auto Disc-Diff
- Other Names: Inner Shaft, Output Shaft, Shaft
- Item Dimensions: 7.0 x 6.8 x 5.6 inches
- Item Weight: 3.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Inner Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$434.82 MSRP:$641.21You Save: $206.39 (33%)Product Specifications- Notes: 2.7 Liter W/O ABS, W/15" Wheel
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 30.1 x 7.6 x 7.0 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Axle Shafts
Vehicle Fitment- 1996 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
- $437.19 MSRP:
$644.70You Save: $207.51 (33%)Product Specifications- Notes: 4-Runner; All; W/O 16" Wheel; W/ABS
- Other Names: Axle Shaft
- Item Dimensions: 29.3 x 7.5 x 6.8 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 42311-35350
- Part Description: 1996 Toyota 4Runner Axle Shafts
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$1482.96 MSRP:$2186.80You Save: $703.84 (33%)Product Specifications- Notes: 4WD, 2.7 Liter, 16" Wheel, W/O Auto Disconnect; 4-Runner; 4 Cylinder; W/O Auto Disc-Diff; W/16" Wheel
- Other Names: Axle Assembly, Differential Carrier
- Item Dimensions: 30.7 x 26.6 x 18.2 inches
- Item Weight: 81.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Differential Carrier
Vehicle Fitment- 1996 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
- $226.94 MSRP:
$329.69You Save: $102.75 (32%)Product Specifications- Notes: 4-Runner; All; W/O 16" Wheel; W/O ABS
- Other Names: Axle Shaft
- Item Dimensions: 29.8 x 7.5 x 6.9 inches
- Item Weight: 14.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Axle Shafts
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
- $454.22 MSRP:
$669.81You Save: $215.59 (33%)Product Specifications- Notes: 4-Runner; 6 Cylinder; 2WD
- Other Names: Drive Shaft
- Item Dimensions: 34.7 x 6.9 x 5.6 inches
- Item Weight: 27.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Drive Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 6 Cyl 3.4 L GAS
- $447.12 MSRP:
$659.34You Save: $212.22 (33%)Product Specifications- Notes: 4-Runner; All; W/16" Wheel; W/ABS
- Other Names: Axle Shaft
- Item Dimensions: 27.4 x 8.3 x 7.6 inches
- Item Weight: 15.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 42311-35400
- Part Description: 1996 Toyota 4Runner Axle Shafts
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
- $395.46 MSRP:
$583.15You Save: $187.69 (33%)Product Specifications- Notes: 4-Runner; 6 Cylinder; Auto Trans
- Other Names: Drive Shaft
- Item Dimensions: 29.5 x 5.4 x 5.2 inches
- Item Weight: 16.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Drive Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Limited, SR5 | 6 Cyl 3.4 L GAS
- $436.65 MSRP:
$643.90You Save: $207.25 (33%)Product Specifications- Notes: 4-Runner; 4 Cylinder; Auto Trans
- Other Names: Drive Shaft
- Item Dimensions: 30.3 x 5.6 x 5.3 inches
- Item Weight: 15.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Drive Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
- $418.58 MSRP:
$617.26You Save: $198.68 (33%)Product Specifications- Notes: 4-Runner; 4 Cylinder; Manual Trans; All
- Other Names: Drive Shaft
- Item Dimensions: 29.2 x 5.4 x 5.3 inches
- Item Weight: 16.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Drive Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
- $244.45 MSRP:
$355.13You Save: $110.68 (32%)Product Specifications- Notes: 4-Runner; All; W/16" Wheel; W/O ABS
- Other Names: Axle Shaft
- Item Dimensions: 28.4 x 8.7 x 7.7 inches
- Item Weight: 15.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Axle Shafts
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
Product Specifications- Notes: Measurement taken from end of flange face to end of flange face;with 24-1/2" (622 mm) Long Driveshaft
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: Yes
- Length: 24.5; 622.3
- Measurement Method: Measurement taken from end of flange face to end of flange face
- Product Condition: Remanufactured
- Tubing Outer Diameter: 2.51; 63.63
- UPC: 082617578462
- Part Description: 1996 Toyota 4Runner Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1996 Toyota 4Runner | All Trims | 6 Cyl 3.4L
- Product Specifications
- Notes: 4-Runner; 4 Cylinder; 4WD; Manual Trans;4-Runner; 6 Cylinder; 4WD; Auto Trans
- Other Names: Drive Shaft
- Item Dimensions: 34.0 x 7.0 x 5.4 inches
- Item Weight: 14.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Drive Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
Product Specifications- Notes: 4WD; 4-Runner
- Location: Driver Side; Passenger Side
- Item Dimensions: 30.4 x 7.3 x 6.4 inches
- Item Weight: 14.60 Pounds
- Part Description: 1996 Toyota 4Runner Axle Assembly
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
- Product Specifications
- Notes: 2.7 Liter W/O ABS, W/16" Wheel;3.4 Liter, W/O ABS
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 28.2 x 8.7 x 7.5 inches
- Item Weight: 15.50 Pounds
- Part Description: 1996 Toyota 4Runner Axle Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
- Product Specifications
- Notes: 4-Runner; W/O Auto Disc-Diff
- Other Names: Output Shaft, Shaft
- Item Dimensions: 7.0 x 6.8 x 5.7 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Output Shaft
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
Product Specifications- Notes: 4WD, 2.7 Liter, 15" Wheel, W/Auto Disconnect;4WD, 3.4 Liter, W/Auto Disconnect; 4-Runner; 4 Cylinder; W/Auto Disc-Diff; W/O 16" Wheel;4-Runner; 6 Cylinder; W/Auto Disc-Diff
- Other Names: Axle Assembly, Differential Carrier
- Item Dimensions: 29.9 x 25.9 x 18.4 inches
- Item Weight: 76.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Front Differential Carrier Assembly
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
- Product Specifications
- Notes: All Models
- Other Names: Shaft, Shaft Assembly, Shaft Kit, Strut
- Item Dimensions: 11.4 x 1.9 x 1.8 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Shaft Kit
Vehicle Fitment- 1996 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
- Product Specifications
- Notes: 4WD, 3.4 Liter, W/O Auto Disconnect; 4-Runner; 6 Cylinder; W/O Auto Disc-Diff
- Other Names: Axle Assembly, Differential Carrier
- Item Dimensions: 29.6 x 26.4 x 18.0 inches
- Item Weight: 78.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 41110-35770
- Part Description: 1996 Toyota 4Runner Front Differential Carrier Assembly
Vehicle Fitment- 1996 Toyota 4Runner | Limited, SR5 | 6 Cyl 3.4 L GAS
- Product Specifications
- Notes: 4WD, 2.7 Liter, 15" Wheel, W/O Auto Disconnect; 4-Runner; 4 Cylinder; W/O Auto Disc-Diff; W/O 16" Wheel
- Other Names: Axle Assembly, Differential Carrier
- Item Dimensions: 30.4 x 25.9 x 17.9 inches
- Item Weight: 83.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota 4Runner Front Differential Carrier Assembly
Vehicle Fitment- 1996 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
- Product Specifications
- Notes: 4WD, 2.7 Liter, 16" Wheel, W/Auto Disconnect; 4-Runner; 4 Cylinder; W/Auto Disc-Diff; W/16" Wheel
- Other Names: Axle Assembly, Differential Carrier
- Item Dimensions: 29.6 x 26.1 x 18.0 inches
- Item Weight: 77.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 41110-35830
- Part Description: 1996 Toyota 4Runner Front Differential Carrier Assembly
Vehicle Fitment- 1996 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
1-30 of 34 Results
< Previous
12
Next >