< Back ×
My Vehicle Change Vehicle
1998 Ford Ranger
< Back to View All
Ignition, Distributors & ECM
- Department
- Brands
- Prices
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F8PZ-12A650-EMA
Product Specifications- Notes: 3.0 Liter, 4WD, Auto Trans, California
- Item Dimensions: 10.8 x 6.6 x 2.3 inches
- Item Weight: 2.10 Pounds
- Replaces: F87Z-12A650-BRA
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Splash, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$249.61 MSRP:$368.33You Save: $118.72 (33%)
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8479FProduct Specifications- Notes: PATS Module Requires Programming after ECM Install.;All Calibrations with Module ID ML2-8D2;Correct VIN and OE Number Required When Ordering;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- UPC: 082617712965
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 3.0L
$149.77
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F87Z-12A650-AMC
Product Specifications- Notes: 4.0 Liter, Federal Emission, Manual Trans
- Item Dimensions: 11.2 x 7.2 x 2.8 inches
- Item Weight: 2.20 Pounds
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Edge, Splash, XL, XLT | 6 Cyl 4.0 L GAS
$281.32 MSRP:$384.69You Save: $103.37 (27%)OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F8PZ-12A650-ESAProduct Specifications- Notes: 3.0 Liter, 4WD, Manual Trans, Federal
- Item Dimensions: 10.5 x 6.8 x 2.3 inches
- Item Weight: 2.30 Pounds
- Replaces: F87Z-12A650-ZB
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Splash, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$207.19 MSRP:$308.33You Save: $101.14 (33%)
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F87Z-12A650-UB
Product Specifications- Notes: 2.5 Liter, Federal Emission, Auto Trans
- Item Dimensions: 11.0 x 7.5 x 2.8 inches
- Item Weight: 2.40 Pounds
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS
$202.71 MSRP:$301.67You Save: $98.96 (33%)OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F8PZ-12A650-ETAProduct Specifications- Notes: 3.0 Liter, 2WD, Manual Trans, California
- Item Dimensions: 10.8 x 6.9 x 2.3 inches
- Item Weight: 2.40 Pounds
- Replaces: F87Z-12A650-AAB
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Splash, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$202.71 MSRP:$301.67You Save: $98.96 (33%)Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8709Product Specifications- Notes: Correct VIN and OE Number Required When Ordering;with Calibration # 8-49A, 9B1M-AA, AB;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 4 Cyl 2.5L
$126.15Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8959Product Specifications- Notes: Correct VIN and OE Number Required When Ordering;with Calibration # 8-55F
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 3.0L
$147.44Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8701Product Specifications- Notes: Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;with Calibration # 8-50A;Correct VIN and OE Number Required When Ordering
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 4 Cyl 2.5L
$123.00Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8442FProduct Specifications- Notes: Correct VIN and OE Number Required When Ordering;All Calibrations with Module ID ML2-4B1,481,831;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 3.0L
- 1998 Ford Ranger | All Trims | 6 Cyl 4.0L
$96.70Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8961Product Specifications- Notes: with Calibration # 8-55R;Correct VIN and OE Number Required When Ordering
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 3.0L
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8478FProduct Specifications- Notes: PATS Module Requires Programming after ECM Install.;All Calibrations with Module ID ML2-8D1;Correct VIN and OE Number Required When Ordering;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- UPC: 082617712873
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 3.0L
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8964Product Specifications- Notes: Correct VIN and OE Number Required When Ordering;with Calibration # 8-55S
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 3.0L
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8243Product Specifications- Notes: Correct VIN and OE Number Required When Ordering;with Calibration # 8-57F;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 4.0L
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8712Product Specifications- Notes: Correct VIN and OE Number Required When Ordering;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;with Calibration # 8-49T, 9B1M-BA;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 4 Cyl 2.5L
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F87Z-12A650-AKCProduct Specifications- Notes: 4.0 Liter, California Emission, Manual Trans
- Item Dimensions: 10.8 x 6.7 x 2.3 inches
- Item Weight: 2.40 Pounds
- Replaces: F87Z-12A650-AKB
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Edge, Splash, XL, XLT | 6 Cyl 4.0 L GAS
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F87Z-12A650-VCProduct Specifications- Notes: 2.5 Liter, California Emission, Auto Trans
- Item Dimensions: 11.0 x 7.4 x 2.8 inches
- Item Weight: 2.20 Pounds
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS
OEM (Genuine) 1998 Ford Ranger Engine Control Module
PartNumber: F7PZ12A650AAA
Product Specifications- Notes: Ranger; 4.0L
- Part Description: 1998 Ford Ranger Engine Control Module
Vehicle Fitment- 1998 Ford Ranger | Splash, Sport, STX, XL, XLT | 6 Cyl 4.0 L GAS
OEM (Genuine) 1998 Ford Ranger Engine Control Module
PartNumber: F7PZ12A650BXAProduct Specifications- Notes: Ranger; 3.0L
- Part Description: 1998 Ford Ranger Engine Control Module
Vehicle Fitment- 1998 Ford Ranger | Splash, Sport, STX, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F87Z-12A650-BTAProduct Specifications- Notes: 4.0 Liter, Federal Emission, Auto Trans
- Item Dimensions: 10.9 x 7.2 x 2.7 inches
- Item Weight: 2.40 Pounds
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Edge, Splash, XL, XLT | 6 Cyl 4.0 L GAS
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F87Z-12A650-BXAProduct Specifications- Notes: 4.0 Liter, California Emission, Auto Trans
- Item Dimensions: 11.1 x 7.3 x 2.8 inches
- Item Weight: 2.20 Pounds
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Edge, Splash, XL, XLT | 6 Cyl 4.0 L GAS
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8245Product Specifications- Notes: Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;with Calibration # 8-57S;Correct VIN and OE Number Required When Ordering;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 4.0L
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F8PZ-12A650-EKAProduct Specifications- Notes: 3.0 Liter, 2WD, Auto Trans, Federal
- Item Dimensions: 10.6 x 6.8 x 2.3 inches
- Item Weight: 2.20 Pounds
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Splash, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8246Product Specifications- Notes: Correct VIN and OE Number Required When Ordering;This Unit is Pre-Programmed at the Factory;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;with Calibration # 8-57T
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 4.0L
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F8PZ-12A650-ELAProduct Specifications- Notes: 3.0 Liter, 4WD, Auto Trans, Federal
- Item Dimensions: 10.8 x 6.7 x 2.3 inches
- Item Weight: 2.10 Pounds
- Replaces: F87Z-12A650-BPA
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Splash, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8434FProduct Specifications- Notes: All Calibrations with Module ID ML2-482;Correct VIN and OE Number Required When Ordering;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Aluminum
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 4.0L
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F8PZ-12A650-ENAProduct Specifications- Notes: 3.0 Liter, 2WD, Auto Trans, California
- Item Dimensions: 10.9 x 6.7 x 2.4 inches
- Item Weight: 2.10 Pounds
- Replaces: F87Z-12A650-BSA
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Splash, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8711Product Specifications- Notes: Correct VIN and OE Number Required When Ordering;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;This Unit is Pre-Programmed at the Factory;with Calibration # 8-49S, 9B1M-BB
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 4 Cyl 2.5L
OEM (Genuine) 1998 Ford Ranger ECM
PartNumber: F8PZ-12A650-EPAProduct Specifications- Notes: 3.0 Liter, 2WD, Manual Trans, Federal
- Item Dimensions: 10.7 x 6.6 x 2.4 inches
- Item Weight: 1.40 Pounds
- Part Description: 1998 Ford Ranger ECM
Vehicle Fitment- 1998 Ford Ranger | Splash, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Cardone Reman® Remanufactured Engine Control Computer for 1998 Ford Ranger
PartNumber: 78-8960Product Specifications- Notes: Correct VIN and OE Number Required When Ordering;with Calibration # 8-55H
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1998 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 1998 Ford Ranger | All Trims | 6 Cyl 3.0L
1-30 of 33 Results
< Previous
12
Next >