< Back ×
1999 Jeep Cherokee Driveshaft
My Vehicle Change Vehicle
1999 Jeep Cherokee
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 1999 Jeep Cherokee Shaft-Stub
PartNumber: 4728984$288.95 MSRP:$434.00You Save: $145.05 (34%)Product Specifications- Notes: 4WD, W/ABS
- Location: Driver Side; Passenger Side
- Other Names: Outer Axle Shaft, Outer Shaft
- Item Dimensions: 7.7 x 5.7 x 5.8 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Jeep Cherokee Shaft-Stub
Vehicle Fitment- 1999 Jeep Cherokee | Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1999 Jeep Cherokee Axle Shaft Rear Right, Right
PartNumber: 4713192$419.09 MSRP:$638.00You Save: $218.91 (35%)Product Specifications- Notes: Dana
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 33.2 x 8.7 x 8.3 inches
- Item Weight: 19.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Jeep Cherokee Axle Shaft Rear Right, Right
Vehicle Fitment- 1999 Jeep Cherokee | Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Notes: Mj, Xj Series; Right; W/O Disconnect; W/O ABS
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 43.4 x 5.6 x 5.5 inches
- Item Weight: 18.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Jeep Cherokee Axle Shaft Assembly
Vehicle Fitment- 1999 Jeep Cherokee | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Notes: with Kanda Transfer Case;with Dana Model 30 Axle;with 29-1/4" (743 mm) Long Driveshaft;with 231 Transfer Case;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 29.25"
- Length (mm): 742,95
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1999 Jeep Cherokee Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1999 Jeep Cherokee | All Trims | 6 Cyl 4.0L
- Product Specifications
- Notes: Mj, Xj Series; Left; W/O Disconnect; W/O ABS
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 32.6 x 6.4 x 6.5 inches
- Item Weight: 11.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Jeep Cherokee Axle Shaft Assembly
Vehicle Fitment- 1999 Jeep Cherokee | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: 4WD, W/O ABS
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly, Outer Shaft
- Fitment Type: Direct Replacement
- Part Description: 1999 Jeep Cherokee Shaft-Stub
Vehicle Fitment- 1999 Jeep Cherokee | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Notes: 4WD, W/ABS; Mj, Xj Series; Right; W/O Disconnect; W/ABS
- Location: Passenger Side
- Other Names: Axle Assembly, Axle Shaft, Axle Shaft Assembly
- Item Dimensions: 39.4 x 7.0 x 6.6 inches
- Item Weight: 18.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Jeep Cherokee Axle Assembly (Right Front)
Vehicle Fitment- 1999 Jeep Cherokee | Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: 4WD, W/ABS; Mj, Xj Series; Left; W/O Disconnect; W/ABS
- Location: Driver Side
- Other Names: Axle Assembly, Axle Shaft, Axle Shaft Assembly
- Item Dimensions: 24.3 x 3.1 x 1.6 inches
- Item Weight: 11.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Jeep Cherokee Axle Shaft Front Driver Left Side Hand
Vehicle Fitment- 1999 Jeep Cherokee | Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Notes: Dana, W/Locking Diff
- Other Names: Axle Assembly
- Item Dimensions: 64.9 x 17.2 x 12.2 inches
- Item Weight: 111.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Jeep Cherokee Axle-Service Rear
Vehicle Fitment- 1999 Jeep Cherokee | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Dana, W/O Locking Diff
- Part Description: 1999 Jeep Cherokee Driveshaft
Vehicle Fitment- 1999 Jeep Cherokee | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Chrysler, W/O Anti Slip
- Part Description: 1999 Jeep Cherokee Driveshaft
Vehicle Fitment- 1999 Jeep Cherokee | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Chrysler, W/Anti Slip
- Part Description: 1999 Jeep Cherokee Driveshaft
Vehicle Fitment- 1999 Jeep Cherokee | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: 2WD; Jeep
- Part Description: 1999 Jeep Cherokee Driveshaft
Vehicle Fitment- 1999 Jeep Cherokee | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Product Specifications
- Notes: Chrysler
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Weight: 18.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Jeep Cherokee Axle Shaft Replaces
Vehicle Fitment- 1999 Jeep Cherokee | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS