2000 Cadillac Escalade Wheel Hub Bolt

You need to install the stud to the hub and bearing assembly, four washers and the nut to the stud, the brake caliper and the tire, and the wheel, and then lower the vehicle.

You need to start the new stud into the axle flange hole by pressing firmly with your hand, thread the lug nut on the stud with the flat side of the lug nut to the vehicle, and tighten the lug nut to draw the stud into the rear of the flange. Then you can thread the lug nut off the stud, and install the tire and wheel assembly. Install the brake drum and lower the vehicle.

You need to raise the vehicle, support the vehicle with suitable safety stands allow the axle to hang free and remove the tire and wheel assembly and the brake drum, and then use the J 6627-A to remove the stud from the axle flange.

You need to raise the vehicle, support the vehicle with suitable safety stands and remove the tire and the wheel, the brake caliper, the rotor, and the hub bolt using the J 6627-A.