< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Hoods
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Blazer Lock Assembly
PartNumber: 15757371
Product Specifications- Other Names: Latch, Lock, Lock Assembly
- Item Dimensions: 6.2 x 3.2 x 3.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16630592
- Part Description: 2000 Chevrolet Blazer Lock Assembly
Vehicle Fitment- 2000 Chevrolet Blazer | Base, Cheyenne, Custom Deluxe, LS, LT, Scottsdale, Silverado, Silverado Sport, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
$78.77 MSRP:$118.84You Save: $40.07 (34%)
Dorman® OE Solutions Hood Latch for 2000 Chevrolet Blazer
PartNumber: 315-100Product Specifications- Notes: Packaging Type: Box; Pkg Quantity: 1
- Attachment Type: Bolt
- Installation Instructions Included: No
- OE Part Number: 15757371, 16630592
- Package Contents: One Latch Assembly
- UPC: 019495090007
- Part Description: 2000 Chevrolet Blazer OE Solutions Hood Latch
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$63.82
OEM (Genuine) 2000 Chevrolet Blazer Pop-Up Spring
PartNumber: 15018459
Product Specifications- Other Names: Pop-Up Spring, Safety Catch, Spring
- Item Dimensions: 4.9 x 2.7 x 1.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10179200, 14061819
- Part Description: 2000 Chevrolet Blazer Pop-Up Spring
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Latch, Hood Secondary
PartNumber: 15039095
Product Specifications- Notes: Secondary
- Other Names: Latch, Safety Catch
- Item Dimensions: 4.4 x 4.3 x 4.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15672318
- Part Description: 2000 Chevrolet Blazer Latch, Hood Secondary
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Hood Latch Repair
Q: How to remove the Hood Latch?
A:
You need to raise and support the hood. Then you need to remove the bolts that retain the latch assembly to the hood. Finally, you can remove the secondary hood latch assembly from the hood.
By Bob
GM Specialist
01/11/2022Q: How to install the Hood Pop-Up Spring?
A:
You need to position the spring to the hood, then you need to insert the spring into the hood retainers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the primary hood latch mounting bolts?
A:
It is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: When can we stop moving the hood latch?
A:
You can stop until the striker enters the center of the latch assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the primary hood latch mounting bracket bolts?
A:
It is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the primary latch support bracket to the radiator support bolts?
A:
It is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Hood Latch?
A:
You need to install the secondary hood latch assembly to the hood. Then you need to install the secondary hood latch bolts that retain the latch assembly to the hood.
By Bob
GM Specialist
01/11/2022Q: How to remove the Hood Front Seal?
A:
You need to use a flat-bladed tool to carefully pry the seal assembly away from the flange, and then you can remove the seal from the hood.
By Bob
GM Specialist
01/11/2022Q: How to remove the Hood Rear Seal?
A:
You need to first remove the screws securing the seal to the cowl. Then you need to use a flat-bladed tool to carefully break the adhesive bond, and you should also remove the seal from the cowl plenum flange. After that, you need to clean the flange, and you can use a suitable solvent such as a mixture of 50 percent isopropyl alcohol and 50 percent water or high-flash naptha. Finally, you need to dry the area thoroughly.
By Bob
GM Specialist
01/11/2022Q: What do we need to notice when we attempt to raise the hood?
A:
Firstly, the hood should raise without the hood striker binding against the latch. Secondly, the secondary latch should engage to prevent the hood from being raised.
By Bob
GM Specialist
01/11/2022See more FAQs (16)