< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Blazer Molding Asm-Front Side Door Lock Pillar Garnish *Medium Beige
PartNumber: 15668797
Product Specifications- Notes: 4 Door
- Location: Driver Side
- Other Names: Lock Pillar Trim
- Item Dimensions: 44.7 x 21.9 x 16.1 inches
- Item Weight: 5.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Molding Asm-Front Side Door Lock Pillar Garnish *Medium Beige
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Molding Asm-Front Side Door Lock Pillar Garnish *Medium Beige
PartNumber: 15668798Product Specifications- Notes: 4 Door
- Location: Passenger Side
- Other Names: Lock Pillar Trim
- Item Dimensions: 46.1 x 19.8 x 10.0 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Molding Asm-Front Side Door Lock Pillar Garnish *Medium Beige
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Molding Asm-Windshield Side Garnish *Graphite
PartNumber: 15743583
Product Specifications- Notes: 2 Door; 4 Door
- Location: Driver Side
- Other Names: Windshield Pillar Trim
- Item Dimensions: 41.1 x 15.1 x 3.6 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Molding Asm-Windshield Side Garnish *Graphite
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Molding Asm-Windshield Side Garnish *Graphite
PartNumber: 15743584
Product Specifications- Notes: 2 Door; 4 Door
- Location: Passenger Side
- Other Names: Windshield Pillar Trim
- Item Dimensions: 41.5 x 14.9 x 3.6 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Molding Asm-Windshield Side Garnish *Graphite
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme | 6 Cyl 4.3 L GAS
FAQ for Pillar Panels Repair
Q: What is the recommended torque for the remaining screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
02/11/2022Q: How to install the Trim Panel?
A:
You need to feed the seat belt through the trim panel and install the shoulder belt opening trim cover. Then you need to install the body side trim panel to the vehicle and install the coat hook plug into the trim panel. After that, you need to install the upper and lower seat belt anchor bolts. Finally, you need to install the door sill trim plate.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the screws that retain the body side trim panel to the vehicle?
A:
The recommended torque is 1.9 N.m (17 lb in).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the upper bolts?
A:
The recommended torque is 70 N.m (52 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to remove the Sunroof Panel Window Garnish Molding?
A:
You need to remove the service cover, and the motor/actuator trim cover screw. Then you need to lower the motor/actuator trim cover and remove the sunroof switch from the cover, and you need to remove the 2 short screws and the 8 screw covers. After that, you need to remove the 8 garnish molding screws. Finally, you need to remove the sunroof panel window garnish molding from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the screw that retains the upper and lower front seat belt anchor bolts?
A:
The recommended torque is 70 N.m (52 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the screw that retains the rear seat belt anchor nut?
A:
The recommended torque is 80 N.m (59 lb-ft).
By Bob
GM Specialist
02/11/2022Q: Which tool is required during the Garnish Molding replacement?
A:
You need to prepare a J 38778 Door Trim Pad and Garnish Clip Remover.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the lower seat belt bolt?
A:
The recommended torque is 70 N.m (52 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the lower bolts?
A:
The recommended torque is 80 N.m (59 lb-ft).
By Bob
GM Specialist
02/11/2022See more FAQs (25)