< Back ×
2000 Chevrolet Blazer Power Steering Hose
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Power Steering Lines & Hoses
- Department
- Brands
- Prices
$40.11Product Specifications- Notes: w/o Trlr. Tow. Pkg; Cut to Length, 15";w/Trlr. Tow. Pkg; Cut to Length, 34";w/Trlr. Tow. Pkg; Cut to Length, 37"
- Inside Diameter: 3/8"
- Length: 300"
- Material: Rubber
- Outer Diameter: 0.655"
- Temperature Range: -40°F to +275°F (-40°C to +135°C)
- UPC: 072053418866
- Part Description: 2000 Chevrolet Blazer Power Steering Bulk Hose
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
$39.18 MSRP:$73.94You Save: $34.76 (48%)Product Specifications- Notes: 2WD; 4WD
- Item Dimensions: 9.9 x 9.6 x 2.1 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Upper Return Hose
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: W/Trlr. Tow. Pkg; Cut to Length, 34"; High Temp;W/Trlr. Tow. Pkg; Cut to Length, 37"; High Temp;W/O Trlr. Tow. Pkg; Cut to Length, 15"; High Temp
- Burst Pressure: 1800 psi
- Inside Diameter: 0.375"
- Length: 300"
- Material: CPE (Chlorinated Polyethylene)
- Temperature Range: -40°F to +300°F (-40°C to +150°C)
- UPC: 072053418811
- Working Pressure: 250 psi
- Part Description: 2000 Chevrolet Blazer Bulk High Temperature Power Steering Bulk Hose
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- End 1 Diameter: 16 mm
- End 1 Type: Male O-Ring
- End 2 Diameter: 18 mm
- End 2 Diameter (mm): 18 mm
- End 2 Type: Male O-Ring
- Length: 32"
- Switch Port: Without Switch Port
- UPC: 072053514995
- Part Description: 2000 Chevrolet Blazer Power Steering Pressure Line Hose Assembly
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: w/Trlr. Tow. Pkg; Cut to fit;w/o Trlr. Tow. Pkg; Cut to fit
- End 1 Diameter: 16 mm
- End 1 Type: Male O-Ring
- Length: 39.25"
- UPC: 072053429176
- Part Description: 2000 Chevrolet Blazer Power Steering Return Line Hose Assembly
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: w/Trlr. Tow. Pkg; Cut to Length, 37";w/Trlr. Tow. Pkg; Cut to Length, 34";w/o Trlr. Tow. Pkg; Cut to Length, 15"
- Inside Diameter: 3/8"
- Length: 48"
- Material: Rubber
- Outer Diameter: 0.655"
- Temperature Range: -40°F to +275°F (-40°C to +135°C)
- UPC: 072053530858
- Part Description: 2000 Chevrolet Blazer Bulk Power Steering Bulk Hose
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: w/Trlr. Tow. Pkg; Cut to Length, 34";w/o Trlr. Tow. Pkg; Cut to Length, 15"
- Inside Diameter: 3/8"
- Length: 36"
- Material: Rubber
- UPC: 072053426809
- Part Description: 2000 Chevrolet Blazer Bulk Power Steering Bulk Hose
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: 2WD; 4WD; S-Series; 4.3l; S-Series
- Other Names: Power Steering Pressure Hose, Pressure Hose
- Item Dimensions: 9.0 x 2.7 x 13.8 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Hose, P/S Gear Inlet
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: w/o Trlr. Tow. Pkg; Cut to Length, 15"
- Inside Diameter: 3/8"
- Length: 24"
- Material: Rubber
- UPC: 072053426793
- Part Description: 2000 Chevrolet Blazer Bulk Power Steering Bulk Hose
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: W/O Windows & Locks;W/Windows & Locks
- Location: Passenger Side
- Other Names: Inlet Pipe, Insert Panel
- Item Dimensions: 29.6 x 9.8 x 2.4 inches
- Item Weight: 2.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Insert, Front Side Door Trim Panel
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 2WD; 4WD; S-Series; 4.3l; S-Series
- Item Dimensions: 4.6 x 16.9 x 0.9 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26044567
- Part Description: 2000 Chevrolet Blazer Hose, P/S Gear Outlet
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Power Steering Hose Repair
Q: What is the recommended torque for the power steering gear return hose to the power steering cooler clamp?
A:
It is 2 Nm (18-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: How to remove the Power Steering Return Hose?
A:
You need to remove the air cleaner assembly, and you need to install a drain pan under the vehicle. Then you need to disconnect the power steering return hose from the power steering pump, and you need to disconnect the power steering gear return hose from the power steering cooler if equipped. After that, you need to disconnect the wiring harness clip from the power steering return hose at the power steering gear, and disconnect the power steering gear return hose from the power steering gear. Finally, you need to remove the power steering gear return hose from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the power steering cooler hose to the power steering cooler clamp?
A:
It is 2 Nm (18-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: How to remove the Repair Power Steering Cooler Pipe/Hose?
A:
You need to remove the air cleaner assembly, and you need to install a drain pan under the vehicle. Then you need to install a drain pan under the vehicle. After that, you need to disconnect the power steering cooler hose from the power steering pump, and you also need to disconnect the power steering cooler hose from the power steering cooler. Finally, you need to remove the power steering cooler hose from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the power steering gear return hose to the power steering gear?
A:
It is 30 Nm (22 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the power steering cooler hose to the power steering pump clamp?
A:
It is 2 Nm (18-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: How to remove the Repair Power Steering Pressure Hose?
A:
You need to raise and suitably support the vehicle, and you need to remove the steering linkage shield if equipped. Then you need to install a drain pan under the vehicle, and you also need to disconnect the pressure hose from the power steering pump. After that, you need to lower the vehicle. Finally, you need to remove the air cleaner assembly.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the power steering gear pressure hose to the power steering gear?
A:
It is 30 Nm (22 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the power steering gear pressure hose to the power steering pump?
A:
It is 25Nm (18 ft. lbs.).
By Bob
GM Specialist
02/11/2022See more FAQs (4)