< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Control Arms & Suspension Rods
- Department
- Brands
- Prices
Monroe® Magnum™ Front Steering Stabilizer for 2000 Chevrolet Blazer
PartNumber: SC2937Product Specifications- Notes: with Original Equipment Steering Damper
- Compressed Length: 12.00"
- Dust Shield: Without
- Extended Bumper Stop: Without
- Extended Hydraulic Lockout: Without
- Extended Length: 19.50"
- Lower Mounting: Loop Bushing Sleeve Mount - 0.4" Sleeve ID x 1.375" Sleeve OAL
- UPC: 048598029171
- Upper Mounting: Loop Bushing Mount - 0.625" Bushing ID x 1.313" Bushing OAL
- Part Description: 2000 Chevrolet Blazer Magnum™ Front Steering Stabilizer
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$38.75
OEM (Genuine) 2000 Chevrolet Blazer Absorber
PartNumber: 22064628
Product Specifications- Notes: 4WD; S-Series
- Other Names: Absorber, Damper, Steering Damper, Steering Shock
- Item Dimensions: 26.8 x 4.4 x 3.5 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 4993599, 04993599
- Part Description: 2000 Chevrolet Blazer Absorber
Vehicle Fitment- 2000 Chevrolet Blazer | Base, Cheyenne, LS, LT, Silverado, Silverado Sport, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
FAQ for Steering Damper Repair
Q: What tools are required during the Steering Damper replacement?
A:
You need to prepare J 24319-B Steering and Tie Rod Puller, J 29193 Steering Linkage Installer (12 mm), and J 29194 Steering Linkage Installer (14 mm).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the steering shock absorber mounting bolt to the front cross member bracket nut?
A:
The recommended torque is 60 Nm (44 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the steering shock absorber ball stud nut?
A:
The recommended torque is 63 Nm (46 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: How to separate the ball joints during the Steering Damper Replacement?
A:
You are recommended to use the proper tool to avoid damage.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the differential carrier shield mounting bolts?
A:
The recommended torque is 25 Nm (19 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the J 29193 or J 29194?
A:
The recommended torque is 54 Nm (40 ft. lbs.).
By Bob
GM Specialist
02/11/2022See more FAQs (1)