Notes: Includes Pad Installation Hardware;with Mechanical Wear Sensor;with Single Rear Wheels (SRW);Optional Ceramic
Abutment Clips Included: No
Chamfered Edges: Yes
FMSI Number: 7260-D370
Friction Material Composition: Ceramic
Friction Material Thickness Inner Pad: 0.67
Friction Material Thickness Outer Pad: 0.618
Pad Shims Included: Yes
Pad Wear Sensor Included: Yes
Pad Wear Sensor Type: Mechanical
Slotted: No
UPC: 008536574996
Part Description: 2000 Chevrolet K3500 ThermoQuiet™ Ceramic Front Disc Brake Pads
More Info
Vehicle Fitment
2000 Chevrolet K3500 | All Trims | All Engines
1-30 of 37 Results
< Previous
12
Next >
FAQ for Brake Pad Set Repair
Q: How to remove the rear brake pads?
A:
The proper way is to remove the caliper, suspend the caliper, and remove the inboard lining and the outboard lining, and any corrosion from the machined surfaces of the steering knuckle and the caliper.
By Bob
GM Specialist
01/11/2022
Q: How to install the rear brake pads?
A:
You shall compress the brake pad tangs as necessary to obtain a secure fit between the outer brake pad and the caliper, install the outer brake pad onto the caliper, file the leading edge of the brake pad tang, and install the caliper.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the rear brake caliper?
A:
The proper way is to install the Brake Caliper mounting plate to the rear axle, the bolts and washers, the brake rotor (with the hub), and the brake caliper.
Q: How to remove the rotor (models above 8600 GVW)?
A:
You shall remove the tire and wheel assembly, the brake caliper, the rear hub/rotor retaining bolts, the front hub/rotor retaining bolts, and the rotor assembly.