< Back ×
2000 Chevrolet Monte Carlo Belt Tensioner
My Vehicle Change Vehicle
2000 Chevrolet Monte Carlo
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Monte Carlo Alternator Mount Bracket
PartNumber: 12590766$175.96 MSRP:$291.23You Save: $115.27 (40%)Product Specifications- Notes: 3.8 Liter, W/O Supercharger; Impala, Monte Carlo; 3.8l
- Item Dimensions: 13.3 x 6.8 x 6.4 inches
- Item Weight: 5.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12564508, 12621651, 24506508
- Part Description: 2000 Chevrolet Monte Carlo Alternator Mount Bracket
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
Gates® Drivealign OE Exact Automatic Belt Tensioner for 2000 Chevrolet Monte Carlo
PartNumber: 38271$98.89Product Specifications- Bearing Bore Inside Diameter 1: 17 mm
- Contact Surface: Smooth/Backside
- Material: Steel
- Number Of Pulleys: 1
- OE Comparison Rating: OE Exact
- Outside Diameter: 2.99"
- Pulley 1 Flanged: No
- UPC: 072053606539
- Width: 31 mm
- Part Description: 2000 Chevrolet Monte Carlo Drivealign OE Exact Automatic Belt Tensioner
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.8L
Dayco® No Slack Automatic Belt Tensioner Assembly for 2000 Chevrolet Monte Carlo
PartNumber: 89302$99.36Product Specifications- Belt Type: Serpentine
- Direction: Clock Wise
- Number Of Pulleys: 1
- Pulley 1 Diameter: 76
- Pulley 1 Flat: Y
- Pulley 1 Width: 31
- UPC: 036687312730
- Part Description: 2000 Chevrolet Monte Carlo No Slack Automatic Belt Tensioner Assembly
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.8L
OEM (Genuine) 2000 Chevrolet Monte Carlo Serpentine Tensioner
PartNumber: 12563084$91.03 MSRP:$150.70You Save: $59.67 (40%)Product Specifications- Notes: 3.4 Liter; Impala, Monte Carlo; 3.4l
- Item Dimensions: 11.8 x 5.0 x 4.9 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24507666, 24504828, 24507685
- Part Description: 2000 Chevrolet Monte Carlo Serpentine Tensioner
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
Product Specifications- Bearing Bore Inside Diameter 1: 17 mm
- Contact Surface: Smooth/Backside
- Material: Steel
- Number Of Pulleys: 1
- OE Comparison Rating: OE Performance
- Outside Diameter: 90 mm
- Pulley 1 Flanged: No
- UPC: 770075252030
- Width: 30.5 mm
- Part Description: 2000 Chevrolet Monte Carlo Drivealign Automatic Belt Tensioner
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
Dayco® No Slack Automatic Belt Tensioner Assembly for 2000 Chevrolet Monte Carlo
PartNumber: 89203$45.72Product Specifications- Belt Type: Serpentine
- Direction: Clock Wise
- Number Of Pulleys: 1
- Pulley 1 Diameter: 90
- Pulley 1 Flat: Y
- Pulley 1 Width: 30
- UPC: 038244912070
- Part Description: 2000 Chevrolet Monte Carlo No Slack Automatic Belt Tensioner Assembly
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
FAQ for Belt Tensioner Repair
Q: How do you install the drive belt tensioner?
A:
You can lubricate the thermostat bypass upper and lower pipe assembly seals, install the drive belt tensioner and the drive belt tensioner bracket bolts, connect the heater hose adapters with heater hoses to the drive belt tensioner, install the generator, the drive belt, and the coolant recovery reservoir, fill the cooling system with engine coolant and connect the battery ground (negative) cable.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the drive belt tensioner?
A:
The procedure is to disconnect the battery ground (negative) cable, drain the engine coolant, remove the coolant recovery reservoir, the drive belt, and the generator, disconnect the heater hose adapters and remove the drive belt tensioner bracket bolts, the drive belt tensioner and the thermostat bypass upper and lower pipe assemblies.
By Bob
GM Specialist
29/10/2022