< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Monte Carlo
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Dorman® Hvac Heater Hose Assembly for 2000 Chevrolet Monte Carlo
PartNumber: 626-113Product Specifications- Notes: Thermostat Bypass Pipe; To Front Cover
- Color: Black
- Construction: Rubber
- Hardware: Use Existing Hardware
- OE Part Number: 24507875
- UPC: 019495356004
- Part Description: 2000 Chevrolet Monte Carlo Hvac Heater Hose Assembly
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$67.11
Gates® Safety Stripe Hvac Heater Hose for 2000 Chevrolet Monte Carlo
PartNumber: 28409Product Specifications- Notes: Cut to Length, 20"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 10 mm
- End 2 Inside Diameter: .375 in
- Material: EPDM
- OE Part Number: 8899
- UPC: 072053081183
- Weight Per Length: 8.25 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 2000 Chevrolet Monte Carlo Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.8L
$45.42
Dayco® Small Id Hvac Heater Hose for 2000 Chevrolet Monte Carlo
PartNumber: 87880Product Specifications- Notes: Bottom Hose; Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 1 Outside Diameter: 15/16
- End 2 Inside Diameter: 3/4
- End 2 Outside Diameter: 1 1/16
- Hose Type: Dual I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 14
- UPC: 036687683519
- Part Description: 2000 Chevrolet Monte Carlo Small Id Hvac Heater Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$12.43
Dorman® Hvac Heater Hose Assembly for 2000 Chevrolet Monte Carlo
PartNumber: 626-525Product Specifications- Notes: Heater Hose Inlet Tube
- Color: Black/Coated
- Coolant Hose Heat Shield Included: No Heat Shield Required
- Coolant Hose Length: 10"
- Coolant Hose Material: Steel
- Coolant Hose Protective Sleeve Included: No Protective Sleeve Required
- Coolant Hose Type: Single I.D. (Inside Diameter)
- End 1 Attachment Type: Flange
- End 2 Attachment Type: Flared
- Hose End (1) Inside Diameter (In): 0.52"
- Hose End (1) Outside Diameter (In): 0.74"
- Hose End (2) Inside Diameter (In): 0.55"
- Hose End (2) Outside Diameter (In): 0.64"
- Maximum Working Pressure (psi): 100
- OE Part Number: 12568743
- Package Contents: Heater Hose Assembly
- SAE Standards: Not Applicable
- Thermostatically Controlled: No
- UPC: 037495332422
- With Clamps: No
- Part Description: 2000 Chevrolet Monte Carlo Hvac Heater Hose Assembly
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$32.62
Gates® Safety Stripe Hvac Heater Hose for 2000 Chevrolet Monte Carlo
PartNumber: 28408Product Specifications- Notes: Cut to Length, 3"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.3125"
- OE Part Number: 49692
- UPC: 072053133226
- Weight Per Length: 7.25 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 2000 Chevrolet Monte Carlo Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$38.12
Dayco® Small Id Hvac Heater Hose for 2000 Chevrolet Monte Carlo
PartNumber: 86123Product Specifications- Notes: Top Hose
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 16
- UPC: 038244356034
- Part Description: 2000 Chevrolet Monte Carlo Small Id Hvac Heater Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$10.49
Dorman® Hvac Heater Hose Assembly for 2000 Chevrolet Monte Carlo
PartNumber: 626-107Product Specifications- Notes: Thermostat Bypass Pipe; Part of the Lower Intake
- Color: Black
- Construction: Rubber
- Hardware: Use Existing Hardware
- OE Part Number: 12590279
- UPC: 019495291053
- Part Description: 2000 Chevrolet Monte Carlo Hvac Heater Hose Assembly
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$29.65
Gates® Hvac Heater Molded Hose for 2000 Chevrolet Monte Carlo
PartNumber: 19210Product Specifications- Centerline Length (in): 15"
- Inside Diameter 1 (in): 0.64"
- Inside Diameter 2 (in): 0.75"
- Number of Branches: 0
- UPC: 072053559446
- Part Description: 2000 Chevrolet Monte Carlo Hvac Heater Molded Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$23.47
Dayco® Small Id Hvac Heater Hose for 2000 Chevrolet Monte Carlo
PartNumber: 87606Product Specifications- Notes: Bottom Hose
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 3/4
- Hose Type: Dual I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 25
- UPC: 038244597932
- Part Description: 2000 Chevrolet Monte Carlo Small Id Hvac Heater Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.8L
$11.55
Gates® Upper Hvac Heater Molded Hose for 2000 Chevrolet Monte Carlo
PartNumber: 19120Product Specifications- Centerline Length (in): 24.9"
- Inside Diameter 1 (in): 0.59"
- Number of Branches: 0
- UPC: 072053467086
- Part Description: 2000 Chevrolet Monte Carlo Upper Hvac Heater Molded Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.8L
$14.61
Gates® Engine Coolant Molded Bypass Hose for 2000 Chevrolet Monte Carlo
PartNumber: 18020Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- OE Part Number: 42569
- UPC: 072053178029
- Part Description: 2000 Chevrolet Monte Carlo Engine Coolant Molded Bypass Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$12.72
Gates® Engine Coolant Molded Bypass Hose for 2000 Chevrolet Monte Carlo
PartNumber: 19026Product Specifications- Branch Quantity: 0
- Centerline Length (in): 6
- Centerline Length (mm): 152
- End 1 Inside Diameter: 0.59 in
- End 2 Inside Diameter: 0.59 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 2465
- UPC: 072053199383
- Part Description: 2000 Chevrolet Monte Carlo Engine Coolant Molded Bypass Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$5.06
Dayco® Small Id Hvac Heater Hose for 2000 Chevrolet Monte Carlo
PartNumber: 86800Product Specifications- Notes: 90 Degree Hose
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/16
- End 2 Inside Diameter: 5/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8 1/4
- UPC: 038244597512
- Part Description: 2000 Chevrolet Monte Carlo Small Id Hvac Heater Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$9.48
Gates® Lower Hvac Heater Molded Hose for 2000 Chevrolet Monte Carlo
PartNumber: 19121Product Specifications- Centerline Length (in): 22.6"
- Inside Diameter 1 (in): 0.62"
- Inside Diameter 2 (in): 0.72"
- Number of Branches: 0
- UPC: 072053467109
- Part Description: 2000 Chevrolet Monte Carlo Lower Hvac Heater Molded Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.8L
$15.03
Gates® Hvac Heater Molded Hose for 2000 Chevrolet Monte Carlo
PartNumber: 19211Product Specifications- Centerline Length (in): 19.3"
- Inside Diameter 1 (in): 0.64"
- Number of Branches: 0
- UPC: 072053553963
- Part Description: 2000 Chevrolet Monte Carlo Hvac Heater Molded Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | 6 Cyl 3.4L
$13.00
FAQ for Heater Hose Repair
Q: What is the removal procedure for the heater pipe (inlet)?
A:
The procedure is to drain the cooling system, remove the fuel injector sight shield, disconnect the heater inlet hose, position aside the heater hose clamp, remove the pipe adapter mounting bolt and remove the pipe adapter.
By Bob
GM Specialist
01/11/2022Q: How do you replace the heater hoses?
A:
You can drain the cooling system, remove the fuel injector sight shield, position aside the heater hose inlet and/or outlet clamp at the pipe adapter, disconnect the heater inlet hose and/or the outlet hose from the pipe adapter, remove the heater hose support bracket nut, position aside the heater core inlet and/or outlet hose clamp, disconnect the heater inlet hose and/or the outlet hose from the heater core, separate the support bracket and remove the heater inlet hose and/or the outlet hose.
By Bob
GM Specialist
01/11/2022Q: What should you do before disconnecting any fitting in the refrigeration system?
A:
You should discharge all of the Refrigerant-134a.
By Bob
GM Specialist
01/11/2022Q: How do you install the heater pipe outlet adapter?
A:
You can lubricate the O-ring, install the pipe adapter, the heater outlet pipe adapter mounting bolt, and the heater outlet hose, secure the heater core hose clamp, install the fuel injector sight shield and drain the cooling system.
By Bob
GM Specialist
01/11/2022Q: How do you install the heater pipe (inlet)?
A:
You can lubricate the O-ring, install the pipe adapter and the heater inlet pipe adapter mounting bolt, connect the inlet hose to the pipe adapter, secure the heater core hose clamp, install the fuel injector sight shield and refill the cooling system.
By Bob
GM Specialist
01/11/2022Q: What should you use when you make connections on the O-ring fittings?
A:
You should use the proper wrenches when you make connections on the O-ring fittings.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the heater hoses?
A:
You can install the heater inlet hose and/or outlet hose and support bracket, connect the heater inlet hose and/or the outlet hose, secure the heater core hose inlet and/or outlet clamp, install the heater hose support bracket and the support bracket nut, connect the heater inlet hose and/or the outlet hose to the pipe adapter, secure the heater hose inlet and/or outlet clamp, install the fuel injector sight shield and refill the cooling system.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the heater outlet pipe adapter?
A:
The procedure is to drain the cooling system, remove the fuel injector sight shield and the heater outlet hose, position aside the heater hose clamp and remove the pipe adapter mounting bolt and the pipe adapter.
By Bob
GM Specialist
01/11/2022See more FAQs (3)