< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Tracker
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2000 Chevrolet Tracker
PartNumber: 65-9286Product Specifications- Notes: with 27-15/16" (710 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 27.937"
- Length (mm): 710
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2000 Chevrolet Tracker Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2000 Chevrolet Tracker | All Trims | All Engines
$332.31
OEM (Genuine) 2000 Chevrolet Tracker Front Axle Propeller Shaft
PartNumber: 30026573
Product Specifications- Notes: Tracker; Manual Trans
- Other Names: Drive Shaft
- Item Dimensions: 29.5 x 3.7 x 3.5 inches
- Item Weight: 10.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Front Axle Propeller Shaft
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Propeller Shaft Assembly (On Esn)
PartNumber: 30028569Product Specifications- Notes: Tracker; 2WD; Manual Trans; 4 Door
- Other Names: Drive Shaft
- Item Dimensions: 61.0 x 8.2 x 8.3 inches
- Item Weight: 26.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Propeller Shaft Assembly (On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
PartNumber: 30021742Product Specifications- Notes: Tracker; 4WD; Auto Trans; 2 Door
- Other Names: Drive Shaft
- Item Dimensions: 33.6 x 3.2 x 3.3 inches
- Item Weight: 10.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Front Wheel Drive Shaft (Lh)
PartNumber: 30024184
Product Specifications- Notes: Tracker; Left; 4 Wheel Drive
- Location: Driver Side
- Other Names: Axle Assembly
- Item Dimensions: 30.9 x 6.7 x 6.7 inches
- Item Weight: 12.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Front Wheel Drive Shaft (Lh)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Propeller Shaft Assembly (On Esn)
PartNumber: 30023524Product Specifications- Notes: Tracker; 2WD; Auto Trans; 4 Door
- Other Names: Drive Shaft
- Item Dimensions: 54.3 x 3.6 x 3.5 inches
- Item Weight: 14.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Propeller Shaft Assembly (On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Front Propeller Shaft Assembly(On Esn)
PartNumber: 30012976
Product Specifications- Notes: Tracker; Auto Trans
- Other Names: Drive Shaft
- Item Dimensions: 31.1 x 6.2 x 3.1 inches
- Item Weight: 7.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Front Propeller Shaft Assembly(On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Front Wheel Drive Shaft(Rh)
PartNumber: 30024183
Product Specifications- Notes: Tracker; Right; 4 Wheel Drive
- Location: Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 28.1 x 4.8 x 4.2 inches
- Item Weight: 13.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Front Wheel Drive Shaft(Rh)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
PartNumber: 30021740Product Specifications- Notes: Tracker; 2WD; Auto Trans; 2 Door
- Other Names: Drive Shaft
- Item Dimensions: 44.1 x 3.2 x 3.1 inches
- Item Weight: 12.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Propeller Shaft
PartNumber: 30021741
Product Specifications- Notes: Tracker; 4WD; Manual Trans; 2 Door
- Other Names: Drive Shaft
- Item Dimensions: 35.2 x 3.3 x 3.4 inches
- Item Weight: 11.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Propeller Shaft
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
PartNumber: 30021739Product Specifications- Notes: Tracker; 2WD; Manual Trans; 2 Door
- Other Names: Drive Shaft
- Item Dimensions: 45.9 x 3.1 x 3.1 inches
- Item Weight: 13.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
PartNumber: 30020719Product Specifications- Notes: Tracker; 4WD; Auto Trans; 4 Door
- Other Names: Drive Shaft
- Item Dimensions: 44.4 x 6.4 x 3.1 inches
- Item Weight: 12.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
PartNumber: 30020718Product Specifications- Notes: Tracker; 4WD; Manual Trans; 4 Door
- Other Names: Drive Shaft
- Item Dimensions: 46.8 x 4.6 x 3.2 inches
- Item Weight: 13.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Rear Propeller Shaft Assembly(On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Rear Axle Shaft, Rh (On Esn)
PartNumber: 91177739
Product Specifications- Notes: Tracker; Right
- Location: Passenger Side
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 37.3 x 10.8 x 10.8 inches
- Item Weight: 20.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91175561
- Part Description: 2000 Chevrolet Tracker Rear Axle Shaft, Rh (On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Rear Axle Shaft, Lh (On Esn)
PartNumber: 91177740Product Specifications- Notes: Tracker; Left
- Location: Driver Side
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 37.3 x 10.7 x 11.0 inches
- Item Weight: 22.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91175562
- Part Description: 2000 Chevrolet Tracker Rear Axle Shaft, Lh (On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Front Drive Axle Inner Shaft
PartNumber: 91174596
Product Specifications- Notes: Tracker; 4 Wheel Drive
- Other Names: Axle Shaft, Output Shaft
- Item Dimensions: 16.8 x 4.7 x 4.6 inches
- Item Weight: 5.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Front Drive Axle Inner Shaft
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Shaft, Differential Pinion Gear
PartNumber: 91175343Product Specifications- Notes: Tracker; Manual Trans
- Other Names: Shaft
- Item Dimensions: 4.7 x 4.2 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Shaft, Differential Pinion Gear
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Shaft, Differential Pinion Gear
PartNumber: 91174199Product Specifications- Notes: Tracker; Auto Trans
- Other Names: Shaft
- Item Dimensions: 5.1 x 4.1 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96058363
- Part Description: 2000 Chevrolet Tracker Shaft, Differential Pinion Gear
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
FAQ for Driveshaft Repair
Q: What is the proper way to install the two-piece propeller shaft?
A:
The proper way is to install the sliding yoke into the transmission with the two-piece propeller shaft assembly, install the mid-shaft bearing support bolts, and then install the pinion flange yoke to the differential pinion flange with the reference marks.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the two-piece propeller shaft?
A:
The procedure is to remove the 4 bolts and the 4 nuts lock washer, remove the mid-shaft bearing support bolts, remove the sliding yoke and the two-piece propeller shaft assembly from the transmission, and then inspect the universal joints for smooth pivoting.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the rear propeller shaft?
A:
The proper way is to install the sliding yoke into the transmission, and then install the pinion flange yoke to the differential pinion flange aligning the reference marks on the pinion flange yoke and the differential pinion flange.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the propeller shaft?
A:
The proper way is to install the sliding yoke into the transfer case, install the pinion flange yoke to the differential pinion flange, and then lower the vehicle.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the rear propeller shaft?
A:
The procedure is to remove the 4 bolts and the 4 nuts holding the yoke, remove the sliding yoke from the transmission, remove the rear propeller shaft from the vehicle, and then inspect the pinion flange yoke.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the front propeller shaft?
A:
The procedure is to remove the 4 bolts and 4 nuts holding the yoke, remove the sliding yoke from the transfer case, and then inspect the sliding yoke splines for excessive wear or damage.
By Bob
GM Specialist
29/10/2022See more FAQs (1)