< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Tracker
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Tracker Fuel Injection Air Meter Body
PartNumber: 91174448
Product Specifications- Notes: Tracker; 2.0L
- Other Names: Throttle Body
- Item Dimensions: 9.6 x 7.2 x 6.3 inches
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Fuel Injection Air Meter Body
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Throttle Body Assembly(On Esn)
PartNumber: 91174449
Product Specifications- Notes: Tracker; 1.6L
- Other Names: Throttle Body
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Throttle Body Assembly(On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
FAQ for Throttle Body Repair
Q: How to adjust the accelerator cable?
A:
The proper way is to inspect the accelerator pedal free play with the throttle valve closed, loosen the accelerator cable locknut at the throttle body bracket, turn the accelerator cable adjusting nut in order to obtain the specified accelerator pedal free play, make the accelerator pedal free play is within the specified value, install the accelerator cable locknut, tighten the accelerator cable locknut to 23 N.m (17 lb-ft), and then adjust the height of the accelerator pedal stop (1) in order to obtain the specified accelerator cable end play.
By Bob
GM Specialist
02/11/2022Q: How to remove the accelerator controls cable?
A:
The proper way is to disconnect the accelerator control cable from the accelerator pedal, push the accelerator control cable through the bulkhead grommet, disconnect the accelerator control cable from the throttle body, remove the cable end from the slot, and then remove the accelerator control cable from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to remove the throttle valve cable/linkage?
A:
The proper way is to remove the TV cable from the throttle body linkage, remove the TV cable casing from the TV cable bracket at the throttle body, remove 1 bolt and the TV cable retaining bracket from the transmission, remove the transmission fluid pan the bolts and the gasket from the transmission, and then remove the TV cable case from the transmission.
By Bob
GM Specialist
02/11/2022Q: How to clean the throttle body?
A:
The proper way is to remove the throttle body from the vehicle, remove any dirt or carbon deposits/buildup from the throttle valve and the throttle bore, remove any dirt or carbon from the bypass air passages in the throttle body, remove any dirt or carbon from the crankcase breather passage and pipe, clean the passages and the throttle bore with compressed air, inspect that the throttle valve operates smoothly and freely, and then install the throttle body to the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to install the throttle valve cable/linkage?
A:
The proper way is to install the valve body in the transmission, install the transmission range switch, install the transmission fluid pan and gasket to the transmission, and then install the TV cable to the throttle body linkage.
By Bob
GM Specialist
02/11/2022Q: How to install the throttle body?
A:
The proper way is to install a new gasket and the throttle body onto the intake manifold, secure the throttle body to the intake manifold with the 2 nuts and/or 2 bolts, and then install the intake air inlet duct to the throttle body.
By Bob
GM Specialist
02/11/2022Q: How to remove the throttle body?
A:
The proper way is to remove the intake air inlet duct from the throttle body, remove the breather hose from the throttle body, remove the two nuts and/or 2 bolts from the throttle body, and then remove the throttle body and the gasket from the intake manifold.
By Bob
GM Specialist
02/11/2022Q: How to install the accelerator controls cable?
A:
The proper way is to install the accelerator control cable to the cable bracket, connect the accelerator control cable to the throttle lever, and then adjust the accelerator control cable end play and the accelerator pedal free play.
By Bob
GM Specialist
02/11/2022Q: How to adjust the throttle valve cable/linkage?
A:
The proper way is to inspect the accelerator cable for proper adjustment, inspect the TV cable locknut and the adjusting nut, ensure that both ends are loose and not in contact with the TV cable bracket at the throttle body, adjust the TV cable with the assistance of a second technician, place the ignition switch in the LOCK position, fully depress and hold the accelerator pedal, measure the distance between the tip end of the TV cable adjustment mark and the end of the boot, pull the TV cable until the TV cable is tight, tighten the TV cable locknut, and then measure the distance between the tip end of the TV cable adjustment mark and the end of the boot.
By Bob
GM Specialist
02/11/2022See more FAQs (4)