< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Venture
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Venture Evaporator
PartNumber: 52494507
Product Specifications- Notes: All Models; 1997-00, Front
- Other Names: Evaporator, Evaporator Core
- Item Dimensions: 8.3 x 16.5 x 13.7 inches
- Item Weight: 8.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 52469295, 52481159
- Part Description: 2000 Chevrolet Venture Evaporator
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$191.79 MSRP:$361.88You Save: $170.09 (48%)
Four Seasons® A C Evaporator Core for 2000 Chevrolet Venture
PartNumber: 54567Product Specifications- Notes: Evaporator replacement for this application may require considerable time, specialty tools, and training.
- Core Depth Fraction: 2-15/16; 2-7/8
- Core Depth MM: 73.025; 74.612
- Core Height Fraction: 11; 11-1/8
- Core Height MM: 279.400; 282.575
- Core Width Fraction: 10; 9-7/8
- Core Width MM: 250.000; 250.825; 254.000
- Depth: 2.875; 2.9375
- Height: 11.000; 11.125
- Inlet Fitting Type: Block Fitting
- Material: Aluminum
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24612] / Green O-Ring
- O-Ring B Quantity: 1
- Outlet Fitting Type: Block Fitting
- UPC: 096361545670
- Width: 10.000; 9.875
- Part Description: 2000 Chevrolet Venture A C Evaporator Core
Vehicle Fitment- 2000 Chevrolet Venture | All Trims | All Engines
$81.84
OEM (Genuine) 2000 Chevrolet Venture Case, Air Distributor
PartNumber: 52482268
Product Specifications- Notes: 1997-00, Front
- Other Names: Air Distributor, Case, Evaporator Case
- Item Dimensions: 16.3 x 11.4 x 9.3 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Case, Air Distributor
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for A/C Evaporator Core Repair
Q: How to remove the Evaporator Core - Auxiliary?
A:
You should remove the rear heater A/C module, the thermal expansion valve, the air distribution valve vacuum actuator, and the HVAC base cover. Next, you should separate the HVAC module case halves, lift the evaporator core from the module half and remove the insulator seal from the evaporator core.
By Bob
GM Specialist
28/10/2022Q: How to remove the Evaporator Core?
A:
You should remove the heater A/C module, the air inlet housing, the heater/defrost valve vacuum actuator, the heater A/C module retaining screws, the heater A/C module seal, the evaporator core, the evaporator core seals, and the evaporator core water core filter.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the heater A/C module retaining screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the screws into the HVAC module case?
A:
The recommended torque is 1.6 N.m (14 lb in).
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the air inlet retaining screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
28/10/2022