Part Description: 2000 Chevrolet Venture Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2000 Chevrolet Venture | All Trims | All Engines
FAQ for Coolant Temperature Sensors Repair
Q: How to remove the Coolant Temperature Sensor/Switch (For Computer)?
A:
You should turn off the ignition, relieve the coolant pressure, disconnect the Engine Coolant Temperature (ECT) sensor electrical connector, and remove the sensor.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the sensor?
A:
The recommended torque is 23 N.m (17 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How to install the Coolant Temperature Sensor/Switch (For Computer)?
A:
You should install the sensor, connect the ECT sensor electrical connector, start the engine, and inspect for leaks.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Water Pump?
A:
You should install the Water Pump gasket, the water pump, the water pump pulley, and the drive belt.
Q: How to remove the Coolant Reservoir?
A:
You should remove the reservoir hose clamp, the mounting clips, and the Coolant Reservoir. In addition, you should clean the coolant reservoir with soap and water.
Q: How to install the Radiator Cooling Fan Motor?
A:
You should install the Cooling Fan Motor, the cooling fan motor screws, the cooling fan motor electrical connector, the cooling fan, and the cooling fans with the cooling fan shroud.