< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Venture
< Back to View All
Exhaust Manifolds, Pipes & Mufflers
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Venture Cross Over Pipe
PartNumber: 24507946
Product Specifications- Item Dimensions: 17.5 x 7.0 x 4.9 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24503680
- Part Description: 2000 Chevrolet Venture Cross Over Pipe
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
Dorman® Steel Natural Exhaust Crossover Pipe for 2000 Chevrolet Venture
PartNumber: 679-002Product Specifications- Catalytic Converter Included: No
- Finish: Natural
- Flange Quantity: 2
- Flanged: Yes
- Gasket or Seal Included: Yes
- Height: 3.5"
- Inlet Inside Diameter: 2"
- Inlet Outside Diameter: 2.25"
- Material: Steel
- OE Part Number: 24507946
- Outlet Inside Diameter: 2"
- Outlet Outside Diameter: 2.25"
- Overall Length: 21"
- Package Quantity: 1
- Packaging Type: Box
- Strap Hanger Included: No
- UPC: 019495295143
- Welding Required: No
- Width: 6"
- Part Description: 2000 Chevrolet Venture Steel Natural Exhaust Crossover Pipe
Vehicle Fitment- 2000 Chevrolet Venture | All Trims | 6 Cyl 3.4L
OEM (Genuine) 2000 Chevrolet Venture 3Way Catalytic Convertor Assembly (W/ Exhaust Manifold P
PartNumber: 24508549
Product Specifications- Notes: 3.4L; Federal;All Models; 3.4L; Federal
- Other Names: Catalytic Converter, Converter & Pipe
- Item Dimensions: 67.1 x 13.7 x 12.8 inches
- Item Weight: 22.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture 3Way Catalytic Convertor Assembly (W/ Exhaust Manifold P
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Exhaust Muffler Assembly (W/ Exhaust Pipe & Tail Pipe)
PartNumber: 10425104
Product Specifications- Notes: Extended Wheelbase
- Other Names: Muffler, Muffler & Pipe
- Item Dimensions: 101.2 x 17.3 x 8.8 inches
- Item Weight: 36.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10419286
- Part Description: 2000 Chevrolet Venture Exhaust Muffler Assembly (W/ Exhaust Pipe & Tail Pipe)
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Exhaust Muffler Assembly (W/ Exhaust Pipe & Tail Pipe)
PartNumber: 10425103Product Specifications- Notes: Standard Wheelbase
- Other Names: Muffler, Muffler & Pipe
- Fitment Type: Direct Replacement
- Replaces: 10419287
- Part Description: 2000 Chevrolet Venture Exhaust Muffler Assembly (W/ Exhaust Pipe & Tail Pipe)
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, Plus, Value | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Converter & Pipe
PartNumber: 12563204
Product Specifications- Notes: All
- Other Names: Catalytic Converter, Converter & Pipe
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Converter & Pipe
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Exhaust Pipe Repair
Q: How to remove the Exhaust Crossover?
A:
You should drain the engine coolant and remove the following parts: the throttle body air inlet duct, the inlet radiator hose, the thermostat bypass pipe, the exhaust crossover pipe heat shield, and the exhaust crossover pipe.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the exhaust crossover pipe studs/nuts?
A:
The recommended torque is 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: How to install the Exhaust Pipe/Muffler Hanger?
A:
You should install the muffler hanger, the muffler hanger bolts, and the muffler hanger insulators.
By Bob
GM Specialist
29/10/2022Q: How to remove the Exhaust Pipe/Muffler Hanger?
A:
You should remove the muffler hanger insulators, the muffler hanger bolts, and the muffler hanger.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the exhaust crossover pipe nuts?
A:
The recommended torque is 25 N.m ((18 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the exhaust crossover pipe heat shield bolts?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By Bob
GM Specialist
29/10/2022Q: How to remove the Exhaust Crossover Pipe?
A:
First, you should disconnect the battery ground (negative) cable, remove the throttle body air inlet duct, and then drain the coolant from the cooling system. Next, you should remove the following parts: the inlet radiator hose, the thermostat bypass pipe, the exhaust crossover heat shield, and the exhaust crossover pipe.
By Bob
GM Specialist
29/10/2022See more FAQs (2)