< Back ×
My Vehicle Change Vehicle
2000 Ford Ranger
< Back to View All
Ignition, Distributors & ECM
- Department
- Brands
- Prices
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: 2U7Z-12A650-DCC
Product Specifications- Notes: 3.0 Liter, All
- Item Dimensions: 10.8 x 6.8 x 2.4 inches
- Item Weight: 2.10 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | Edge, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$207.05 MSRP:$305.00You Save: $97.95 (33%)
Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8479FProduct Specifications- Notes: PATS Module Requires Programming after ECM Install.;All Calibrations with Module ID ML2-8D2;Correct VIN and OE Number Required When Ordering;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- UPC: 082617712965
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
$149.77
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: F87Z-12A650-AMC
Product Specifications- Notes: 4.0 Liter, Federal Emission, Manual Trans
- Item Dimensions: 11.2 x 7.2 x 2.8 inches
- Item Weight: 2.20 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | Edge, Splash, XL, XLT | 6 Cyl 4.0 L GAS
$281.32 MSRP:$384.69You Save: $103.37 (27%)
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: F87Z-12A650-UB
Product Specifications- Notes: 2.5 Liter, Federal Emission, Auto Trans
- Item Dimensions: 11.0 x 7.5 x 2.8 inches
- Item Weight: 2.40 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS
$202.71 MSRP:$301.67You Save: $98.96 (33%)Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8709Product Specifications- Notes: Correct VIN and OE Number Required When Ordering;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;with Calibration # 9B1M-AB;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 4 Cyl 2.5L
$126.15Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8477FProduct Specifications- Notes: All Calibrations with Module ID ML2-8C2;PATS Module Requires Programming after ECM Install.;Correct VIN and OE Number Required When Ordering;Vehicle specific Flash programming req'd ON or OFF the vehicle.Accurate VIN & mileage are req'd. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability & starting issues.
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
$141.79Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8965FProduct Specifications- Notes: Correct VIN and OE Number Required When Ordering;PATS Module Requires Programming after ECM Install.;All Calibrations with Module ID ML2-8C1;Vehicle specific Flash programming req'd ON or OFF the vehicle.Accurate VIN & mileage are req'd. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability & starting issues.
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
$120.03Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8912FProduct Specifications- Notes: All Calibrations with Module ID ML2-8E2;Correct VIN and OE Number Required When Ordering;PATS Module Requires Programming after ECM Install.;Vehicle specific Flash programming req'd ON or OFF the vehicle.Accurate VIN & mileage are req'd. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability & starting issues.
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8478FProduct Specifications- Notes: All Calibrations with Module ID ML2-8D1;Correct VIN and OE Number Required When Ordering;PATS Module Requires Programming after ECM Install.;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- UPC: 082617712873
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8480FProduct Specifications- Notes: All Calibrations with Module ID ML2-8E1;PATS Module Requires Programming after ECM Install.;Correct VIN and OE Number Required When Ordering;Vehicle specific Flash programming req'd ON or OFF the vehicle.Accurate VIN & mileage are req'd. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability & starting issues.
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8470FProduct Specifications- Notes: PATS Module Requires Programming after ECM Install.;Correct VIN and OE Number Required When Ordering;All Calibrations with Module ID ML2-833;Vehicle specific Flash programming req'd ON or OFF the vehicle.Accurate VIN & mileage are req'd. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability & starting issues.
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
- 2000 Ford Ranger | All Trims | 6 Cyl 4.0L
Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8469FProduct Specifications- Notes: PATS Module Requires Programming after ECM Install.;Correct VIN and OE Number Required When Ordering;All Calibrations with Module ID ML2-832,832A;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
- 2000 Ford Ranger | All Trims | 6 Cyl 4.0L
Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8712Product Specifications- Notes: This Unit is Pre-Programmed at the Factory;Correct VIN and OE Number Required When Ordering;with Calibration # 9B1M-BA;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 4 Cyl 2.5L
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: F87Z-12A650-AKCProduct Specifications- Notes: 4.0 Liter, California Emission, Manual Trans
- Item Dimensions: 10.8 x 6.7 x 2.3 inches
- Item Weight: 2.40 Pounds
- Replaces: F87Z-12A650-AKB
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | Edge, Splash, XL, XLT | 6 Cyl 4.0 L GAS
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: F87Z-12A650-VCProduct Specifications- Notes: 2.5 Liter, California Emission, Auto Trans
- Item Dimensions: 11.0 x 7.4 x 2.8 inches
- Item Weight: 2.20 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: F87Z-12A650-BTAProduct Specifications- Notes: 4.0 Liter, Federal Emission, Auto Trans
- Item Dimensions: 10.9 x 7.2 x 2.7 inches
- Item Weight: 2.40 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | Edge, Splash, XL, XLT | 6 Cyl 4.0 L GAS
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: F87Z-12A650-BXAProduct Specifications- Notes: 4.0 Liter, California Emission, Auto Trans
- Item Dimensions: 11.1 x 7.3 x 2.8 inches
- Item Weight: 2.20 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | Edge, Splash, XL, XLT | 6 Cyl 4.0 L GAS
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: XL2Z-12A650-HD
Product Specifications- Notes: Ranger; 2.5L; Auto Trans
- Item Dimensions: 10.5 x 6.9 x 2.3 inches
- Item Weight: 2.20 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | XL, XLT | 4 Cyl 2.5 L GAS
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: XL5Z-12A650-ARCProduct Specifications- Notes: 2.5 Liter, Federal Emission, Manual Trans; Ranger; 2.5L; Manual Trans
- Item Dimensions: 10.5 x 6.6 x 2.4 inches
- Item Weight: 2.20 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: XL5Z-12A650-AYBProduct Specifications- Notes: Ranger; 4.0L
- Item Dimensions: 10.7 x 6.8 x 2.4 inches
- Item Weight: 2.10 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | XL, XLT | 6 Cyl 4.0 L GAS
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: XL5Z-12A650-ECProduct Specifications- Notes: 2.5 Liter, California Emission, Manual Trans
- Item Dimensions: 11.1 x 7.3 x 2.8 inches
- Item Weight: 1.40 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS
Cardone Reman® Remanufactured Engine Control Computer for 2000 Ford Ranger
PartNumber: 78-8711Product Specifications- Notes: Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;This Unit is Pre-Programmed at the Factory;Correct VIN and OE Number Required When Ordering;with Calibration # 9B1M-BB
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 2000 Ford Ranger Remanufactured Engine Control Computer
Vehicle Fitment- 2000 Ford Ranger | All Trims | 4 Cyl 2.5L
OEM (Genuine) 2000 Ford Ranger ECM
PartNumber: YL5Z-12A650-ZAProduct Specifications- Notes: Ranger; 3.0L
- Item Dimensions: 10.4 x 6.8 x 2.3 inches
- Item Weight: 2.20 Pounds
- Part Description: 2000 Ford Ranger ECM
Vehicle Fitment- 2000 Ford Ranger | XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS