Part Description: 2000 GMC C3500 Condenser Asm, A/C
More Info
Vehicle Fitment
2000 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for A/C Condenser Repair
Q: What is the recommended torque for installing bolts when installing the condenser?
A:
The recommended torque is 4.5 N.m (40 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do I remove the blower motor resistor?
A:
You should remove the right rear quarter trim panel, disconnect the electrical connectors, and remove the screws and the Blower Motor Resistor.
Q: How do I install the IAT sensor?
A:
You should install the IAT sensor, and connect the IAT sensor harness connector and the negative battery cable.
Q: What should be particularly cautioned in installing the heater core?
A:
You should tighten the screws on the engine side of the cowl to 1.9 N.m (17 lb in), tighten the two nuts to 2.8 N.m (25 lb in), and tighten the screw on the interior side of the cowl to 11 N.m (97 lb in).