2000 GMC C3500 Alloy Wheels

You should pry the wheel hub cap from the wheel and tire assembly and remove the wheel hub cap from the wheel and tire assembly.

You should install the wheel hub cap to the wheel and tire assembly and tap the wheel hub cap into the wheel and tire assembly.

You should remove the tire and wheel assembly from the vehicle, remove the balance weights and valve stem from the wheel, remove the tire from the wheel, use a suitable remover to wipe, excess grease, wax, and dirt, remove the old clearcoat and the old paint from the wheel by plastic media blasting the wheel, mask off the wheel mounting surface and the lug nut contact surfaces, follow the individual formula and process provided by the manufacturer of each specific paint system to perform the painting process, unmask the wheel, install new valve stem, install the tire to the wheel, rebalance the tire and wheel using new coated balance weigh, clean all the wheel mounting surfaces of any corrosion, any overspray, any dirt and install the tire and wheel assembly to the vehicle.

You can use heating, welding, or peening to repair wheels. These methods are not approved. You can use inner tubes to repair leaky wheels or tires. You can repair the porosity in aluminum wheels. If leaks are found in a steel wheel, you can replace the wheel with a wheel of original equipment quality.

When cleaning clear-coated wheels, you should avoid damage to clear-coat coating by using only recommended clearcoat cleaners. You can not use an abrasive pad or harsh alkaline or acid cleaners on clear-coated wheels. Abrasive pads and harsh cleaners can damage the clear coat.