< Back ×
My Vehicle Change Vehicle
2000 GMC C3500
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Prices
OEM (Genuine) 2000 GMC C3500 Stud, Front Wheel
PartNumber: 88891742
Product Specifications- Notes: 2WD W/15,000 Gvwr
- Other Names: Stud
- Item Dimensions: 4.8 x 3.0 x 0.9 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15589456
- Part Description: 2000 GMC C3500 Stud, Front Wheel
Vehicle Fitment- 2000 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$13.06
OEM (Genuine) 2000 GMC C3500 Stud, Rear Wheel
PartNumber: 12338057
Product Specifications- Notes: 1995-00, 3/4 & 1 Ton W/9.5" Ring Gear
- Other Names: Wheel Stud
- Item Dimensions: 5.1 x 3.0 x 0.9 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 GMC C3500 Stud, Rear Wheel
Vehicle Fitment- 2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Wheel Hub Bolt Repair
Q: How do I install the Front Wheel Fastener?
A:
You should install the wheel hub bolts into the hub/rotor, install the hub/rotor to the vehicle, the tire and wheel assembly and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do I remove the Wheel Stud (Semi-Floating Axle)?
A:
You should raise the vehicle, support the vehicle, remove the tire and wheel assembly, remove the brake drum and remove the stud from the axle flange.
By Bob
GM Specialist
01/11/2022Q: How do I install the Wheel Stud (Semi-Floating Axle)?
A:
You should start the new stud into the axle flange hole by pressing firmly with your hand, thread the lug nut on the stud with the flat side of the lug nut to the vehicle, and tighten the lug nut to draw the stud into the rear of the flange, thread the lug nut off the stud, install the tire and wheel assembly, install the brake drum and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do I remove the Front Wheel Fastener?
A:
You should raise the vehicle, support the vehicle with suitable safety stands, remove the tire and wheel assembly, and remove the hub/rotor assembly and the wheel hub bolts.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Wheel Stud (Full-Floating Axle)?
A:
You should press the wheel studs out of the hub flange, press the new wheel studs into place, make sure of a tight fit and when replacing all of the wheel studs, make sure that the hub oil deflector (if equipped) is in position under the wheel bolt heads.
By Bob
GM Specialist
01/11/2022