< Back ×
My Vehicle Change Vehicle
2000 GMC Savana 1500
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Cardone Reman® Remanufactured Vacuum Power Brake Booster w/o Master Cylinder for 2000 GMC Savana 1500
PartNumber: 54-74810Product Specifications- Notes: without Master Cylinder
- Booster Type: Vacuum
- Casting Material: Steel
- Color: Powder Coated Gray
- Diaphragm Diameter: 11.055"
- Diaphragm Type: Dual
- E-Waste: No
- Master Cylinder: Without
- Master Cylinder Stud Thread Size: M10 x 1.5
- Material: Steel
- Part Description: 2000 GMC Savana 1500 Remanufactured Vacuum Power Brake Booster w/o Master Cylinder
Vehicle Fitment- 2000 GMC Savana 1500 | All Trims | All Engines
$68.62
Centric® Driveline Power Brake Booster for 2000 GMC Savana 1500
PartNumber: 160.80602Product Specifications- Notes: Rod Code G20
- UPC: 805890491729
- Part Description: 2000 GMC Savana 1500 Driveline Power Brake Booster
Vehicle Fitment- 2000 GMC Savana 1500 | All Trims | All Engines
$126.44
OEM (Genuine) 2000 GMC Savana 1500 Power Brake Booster ASSEMBLY
PartNumber: 15192190
Product Specifications- Notes: Hydraulic
- Other Names: Booster Assembly, Brake Booster
- Item Dimensions: 21.0 x 12.9 x 10.8 inches
- Item Weight: 14.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15005467, 15757256, 15969686
- Part Description: 2000 GMC Savana 1500 Power Brake Booster ASSEMBLY
Vehicle Fitment- 2000 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
OEM (Genuine) 2000 GMC Savana 1500 Booster Parking Brake Vacuum
PartNumber: 18029961
Product Specifications- Notes: Vacuum
- Other Names: Booster Assembly, Brake Booster
- Item Dimensions: 11.9 x 15.9 x 11.9 inches
- Item Weight: 14.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 GMC Savana 1500 Booster Parking Brake Vacuum
Vehicle Fitment- 2000 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
FAQ for Brake Booster Repair
Q: How do you install an alarm switch?
A:
You can install the fluid pressure alarm switch to the vehicle, and connect the battery negative cable.
By Bob
GM Specialist
01/11/2022Q: How to install a Vacuum Brake Booster?
A:
You can install the brake master cylinder, the vacuum hose from the check valve, the check valve from the power brake booster, the pushrod retainer, the pushrod, and the stop lamp switch for the power brake booster from the brake pedal, the retaining nuts for the power brake booster from the brake pedal bracket, the power brake booster from the front engine cowl, the gasket between the power brake booster and the front engine cowl.
By Bob
GM Specialist
01/11/2022Q: How do you remove the fluid flow switch?
A:
You can disconnect the battery negative cable, the electrical connector, and the ground strap from the fluid flow alarm switch, remove the hose clamps from the fluid flow alarm switch, the fluid flow alarm switch from the vehicle, disassemble the fluid flow alarm switch from the fittings.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the inlet hose fitting to the power brake booster?
A:
The recommended torque is 36 Nm (27 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power brake booster retaining nuts?
A:
The recommended torque is 36 Nm (27 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to remove the Vacuum Brake Booster Intake Valve?
A:
You can remove the vacuum hose from the intake valve, the intake valve, and the power brake booster intake valve.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the retaining nuts to the power brake booster?
A:
The recommended torque is 36 Nm (27 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How do you install a fluid flow switch?
A:
You can install a new gasket between the switch and the fittings, the switch to the fittings, the fluid flow alarm switch to the vehicle, the hose clamps to the fluid flow alarm switch, connect the electrical connector and ground strap to the fluid flow alarm switch, and connect the battery negative cable.
By Bob
GM Specialist
01/11/2022Q: How to install a Vacuum Brake Booster Intake Valve?
A:
You can install the vacuum hose from the intake valve, the intake valve by carefully twisting the intake valve counter-clockwise off of the retainer, and the power brake booster intake valve.
By Bob
GM Specialist
01/11/2022Q: How do you remove the alarm switch?
A:
You can disconnect the battery negative cable, and the electrical connector from the fluid pressure alarm switch, and remove the fluid pressure alarm switch from the vehicle by rotating the switch in a counterclockwise direction.
By Bob
GM Specialist
01/11/2022See more FAQs (13)