< Back ×
My Vehicle Change Vehicle
2001 Buick Regal
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2001 Buick Regal AC Hose
PartNumber: 10308247
Product Specifications- Notes: Accumulator; Buick;Regal
- Other Names: AC Hose, AC Line, Accumulator Tube, Hose
- Item Dimensions: 22.5 x 11.8 x 18.4 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Buick Regal AC Hose
Vehicle Fitment- 2001 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
$55.71 MSRP:$105.14You Save: $49.43 (48%)
OEM (Genuine) 2001 Buick Regal Hose & Tube Assembly
PartNumber: 19169348
Product Specifications- Notes: 3.8L; Buick;3.8L; Regal
- Item Dimensions: 31.9 x 4.7 x 4.6 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10422442, 10348122
- Part Description: 2001 Buick Regal Hose & Tube Assembly
Vehicle Fitment- 2001 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Tube Asm-A/C Evaporator
PartNumber: 10339261
Product Specifications- Other Names: AC Line, AC Tube, Evaporator Tube
- Item Dimensions: 35.7 x 17.2 x 15.3 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10295391, 10445946, 10433079
- Part Description: 2001 Buick Regal Tube Asm-A/C Evaporator
Vehicle Fitment- 2001 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Tube, Blower Motor Cooling
PartNumber: 52487082
Product Specifications- Other Names: Blower Motor Tube, Hose, Tube
- Item Dimensions: 6.7 x 6.3 x 1.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Buick Regal Tube, Blower Motor Cooling
Vehicle Fitment- 2001 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for A/C Hose Repair
Q: What is the recommended torque for the accumulator tube block fitting bolt?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the service and repair procedure for the hose/line HVAC?
A:
The procedure is to prevent dirt and foreign material from the sealing surfaces of the washers, the hose block, and the A/C compressor ports, clean all of the sealing surfaces with a lint-free rag, ensure that the sealing washers are seated, and the washers must bottom against the surface of the block fitting.
By Bob
GM Specialist
28/10/2022Q: How to install the hose/line HVAC?
A:
You can install the new O-ring seal, the accumulator tube, the accumulator tube to the evaporator, and the accumulator tube to the evaporator core block fitting bolt.
By Bob
GM Specialist
28/10/2022Q: How to remove the hose/line HVAC?
A:
You can remove the refrigerant, remove the air cleaner assembly, the cross vehicle brace, the vacuum brake booster, the accumulator clip, the accumulator tube nut at the accumulator, the accumulator tube from the accumulator, the accumulator tube to evaporator core block fitting bolt, the accumulator tube from the evaporator, the accumulator tube, and the O-ring seal and discard.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the evaporator tube nut?
A:
The recommended torque is 27 N.m (20 lb-ft).
By Bob
GM Specialist
28/10/2022