2001 Buick Regal Window Motor

The recommended torque is 10 N.m (89 lb in).

You can remove the rear door water deflector, loosen the 3 rear door window regulator screws, position the rear door window regulator motor through the access opening in the inner door to gain access to the electrical connector and the rear window regulator motor screws, the rear door window regulator motor electrical connector, the rear door window regulator motor screws, and the rear door window regulator motor and bracket from the rear window regulator.

You can position the rear door window regulator motor and bracket to the rear door window regulator, the rear door window regulator motor screws, the rear door window regulator motor electrical connector, and the rear door window regulator motor inside the rear door and install it into the key slots in the inner door panel, tighten the rear door window regulator screws, and install the rear door water deflector.

The procedure is to remove the door trim panel, position the water deflector to allow access to the power window motor to door mounting screws, the motor electrical connector, the motor-to-door mounting screws, the motor assembly through the door access opening to allow removal of the motor-to-window regulator mounting screws, the motor and door mounting bracket from the window regulator, a new power window motor and door mounting bracket to the window regulator, the motor to the door and install the mounting screws, the motor to the door and install the mounting screws, the water deflector to the door, the new trim panel retainers to the door trim panel, the door trim panel, and verify proper operation of the power window.