< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Astro
< Back to View All
Hoods
- Department
- Brands
- Prices
OEM (Genuine) 2001 Chevrolet Astro Safety Catch
PartNumber: 15186174
Product Specifications- Other Names: Safety Catch
- Item Dimensions: 7.4 x 3.5 x 2.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15677756
- Part Description: 2001 Chevrolet Astro Safety Catch
Vehicle Fitment- 2001 Chevrolet Astro | Base, CL, CS, LS, LT | 6 Cyl 4.3 L GAS
$45.12 MSRP:$68.08You Save: $22.96 (34%)
Dorman® OE Solutions Hood Latch for 2001 Chevrolet Astro
PartNumber: 315-100Product Specifications- Notes: Packaging Type: Box; Pkg Quantity: 1
- Attachment Type: Bolt
- Installation Instructions Included: No
- OE Part Number: 15757371, 16630592
- Package Contents: One Latch Assembly
- UPC: 019495090007
- Part Description: 2001 Chevrolet Astro OE Solutions Hood Latch
Vehicle Fitment- 2001 Chevrolet Astro | All Trims | All Engines
$63.82
OEM (Genuine) 2001 Chevrolet Astro Lock Assembly
PartNumber: 15757371
Product Specifications- Other Names: Latch, Lock, Lock Assembly
- Item Dimensions: 6.2 x 3.2 x 3.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16630592
- Part Description: 2001 Chevrolet Astro Lock Assembly
Vehicle Fitment- 2001 Chevrolet Astro | Base, CL, CS, LS, LT | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
$78.77 MSRP:$118.84You Save: $40.07 (34%)
OEM (Genuine) 2001 Chevrolet Astro Pop-Up Spring
PartNumber: 15018459
Product Specifications- Other Names: Pop-Up Spring, Safety Catch, Spring
- Item Dimensions: 4.9 x 2.7 x 1.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10179200, 14061819
- Part Description: 2001 Chevrolet Astro Pop-Up Spring
Vehicle Fitment- 2001 Chevrolet Astro | Base, CL, CS, LS, LT | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
FAQ for Hood Latch Repair
Q: How to remove the hood rear seal?
A:
You need to remove the rear hood seal retainers. Then you can remove the rear hood seal from the hood.
By Bob
GM Specialist
01/11/2022Q: What tools do you need to remove the hood rear seal?
A:
You need to prepare the J 38778 door trim pad and garnish clip remover.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts securing the hood latch bolt?
A:
The recommended torque is 27 Nm (20 lb.ft.).
By Bob
GM Specialist
01/11/2022Q: How to install the secondary hood latch?
A:
You need to install the secondary hood latch to the hood. Then you can position the tab into the slot and install the hood latch bolt.
By Bob
GM Specialist
01/11/2022Q: How to install the hood rear seal?
A:
After installing the rear hood seal to the hood, you need to push the retainers into the hood to retain the rear hood seal.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts securing the hood to the hinge?
A:
The recommended torque is 25 Nm.
By Bob
GM Specialist
01/11/2022Q: How to remove the hood hinge?
A:
You need to remove the air inlet panel grille. After raising and supporting the hood, you can remove the hinge.
By Bob
GM Specialist
01/11/2022Q: How to remove the hood pop-up spring?
A:
You need to use a suitable flat-bladed tool to push on the hood-mounted end of the spring outward. Then you can remove the spring from the hood.
By Bob
GM Specialist
01/11/2022Q: How to install the hood pop-up spring?
A:
You need to insert the spring into the hood retainers. Then you can install the spring to the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the secondary hood latch?
A:
You need to remove the hood latch bolt. Then you can remove the secondary hood latch from the hood.
By Bob
GM Specialist
01/11/2022See more FAQs (11)