< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Astro
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 2001 Chevrolet Astro
PartNumber: 20-7923Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;without Aftermarket Filtration Improvement;Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 2001 Chevrolet Astro Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 2001 Chevrolet Astro | All Trims | All Engines
$53.64
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2001 Chevrolet Astro
PartNumber: 20-860Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Aftermarket Filtration: Without
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2001 Chevrolet Astro Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2001 Chevrolet Astro | All Trims | All Engines
$45.03
OEM (Genuine) 2001 Chevrolet Astro Power Steering Pump
PartNumber: 88963501
Product Specifications- Notes: 2WD, Power Steering, 6 Cylinder; 4WD, W/Ac; Astro, Safari; 4.3L; Astro, Safari
- Other Names: Power Steering Pump
- Item Dimensions: 9.0 x 6.9 x 6.9 inches
- Item Weight: 9.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19420685
- Part Description: 2001 Chevrolet Astro Power Steering Pump
Vehicle Fitment- 2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
FAQ for Power Steering Pump Repair
Q: How to remove the power steering pump flow control valve?
A:
You need to drain the oil and remove the connector and fitting assembly. Then you can remove the control valve assembly and the O-ring seal.
By Bob
GM Specialist
01/11/2022Q: What tools do you need to replace the power steering pulley?
A:
You need to prepare the J 25034-C power steering pump pulley remover and the J 25033-C power steering pump pulley installer.
By Bob
GM Specialist
01/11/2022Q: How to install the power steering pump flow control valve?
A:
You need to install the flow control spring and lubricate the new O-ring seal with the power steering fluid. Then you need to install the O-ring seal, the control valve assembly, and the connector and fitting assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the power steering pump?
A:
You need to install the power brake booster inlet hose and the power steering pump mounting bolts. Then you can reposition the accessory mounting bracket and tighten the bolts and nut. After raising the vehicle, you can install the power steering pump rear mounting bracket nut, lower the vehicle, uncap the ends of the power steering hoses, and connect the power steering pump remote reservoir hose. Next, you can remove the drain pan, install the power steering pump pulley, bleed the power steering system, and inspect the power steering pump for leaks and the hoses for proper clearance.
By Bob
GM Specialist
01/11/2022Q: How to remove the power steering pulley?
A:
You need to remove the lower fan shroud. Then you can remove the drive belt and the power steering pump pulley.
By Bob
GM Specialist
01/11/2022Q: How to remove the power steering pump?
A:
You need to remove the power steering pump pulley and place a drain pan under the vehicle. Then you can disconnect the power brake booster inlet hose and support the vehicle. After removing the power steering pump rear mounting bracket nut, you can lower the vehicle and loosen the accessory bracket bolts and nut. Then you need to remove the power steering pump mounting bolts, the power steering pump, and the power brake booster inlet hose.
By Bob
GM Specialist
01/11/2022Q: How to install the power steering pulley?
A:
You can place the power steering pump pulley on the end of the power steering pump shaft. Then you need to install the power steering pump pulley.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts securing the connector and fitting assembly?
A:
The recommended torque is 75 Nm (55 ft. lbs.).
By Bob
GM Specialist
01/11/2022See more FAQs (3)