< Back ×
2001 Chevrolet Blazer Driveshaft
My Vehicle Change Vehicle
2001 Chevrolet Blazer
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
$555.71Product Specifications- Notes: with Propshaft Code CNR;with 29-1/8" (740 mm) Long Driveshaft;with NP1 Transfer Case;Supplied as new; Measurement is taken from U-Joint to end of CV Dust Shield
- Greasable: No
- Length: 29.125"
- Length (mm): 740
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2001 Chevrolet Blazer Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | All Trims | All Engines
$460.47Product Specifications- Notes: with 29-1/2" (749 mm) Long Driveshaft;with Propshaft Code GYO;Measurement is taken from end of input shaft to center of U-Joint
- Greasable: No
- Length: 29.5"
- Length (mm): 749,3
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2001 Chevrolet Blazer Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | All Trims | All Engines
$375.63Product Specifications- Notes: with 35-3/8" (898 mm) Long Driveshaft;with Propshaft Code GWO;Measurement is taken from end of input shaft to center of U-Joint
- Greasable: No
- Length: 35.375"
- Length (mm): 898
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2001 Chevrolet Blazer Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | All Trims | All Engines
$358.78Product Specifications- Notes: with Propshaft Code HJO;with 36-3/8" (924 mm) Long Driveshaft;Measurement is taken from end of input shaft to center of U-Joint
- Greasable: Yes
- Length: 36.375"
- Length (mm): 923,925
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2001 Chevrolet Blazer Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | All Trims | All Engines
$51.39 MSRP:$103.65You Save: $52.26 (51%)Product Specifications- Notes: 2WD; S-Series
- Location: Driver Side; Passenger Side
- Item Dimensions: 4.5 x 4.5 x 17.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Shaft Kit, Front Upper Control Arm
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: with NP8 Transfer Case;with 29-3/4" (755 mm) Long Driveshaft;Measurement is taken from U-Joint to end of CV Dust Shield
- Greasable: No
- Length: 29.75"
- Length (mm): 755
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2001 Chevrolet Blazer Remanufactured Driveshafts
Vehicle Fitment- 2001 Chevrolet Blazer | All Trims | All Engines
Product Specifications- Notes: 4WD, W/High Wider; S-Series; 4WD; All
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 32.8 x 6.6 x 6.8 inches
- Item Weight: 14.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Rear Axle Drive Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: S-Series; W/Limited Slip; 3.42 Ratio
- Other Names: Axle Assembly, Case
- Item Dimensions: 11.8 x 11.2 x 10.5 inches
- Item Weight: 19.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Differential
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 4WD, 3.42 Ratio (gu6), Stamped Ztn
- Other Names: Axle Assembly, Differential Assembly
- Item Dimensions: 27.8 x 18.7 x 13.3 inches
- Item Weight: 70.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26046029
- Part Description: 2001 Chevrolet Blazer Front Axle Assembly (3.42 Ratio)
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 4WD, 1997-05, W/O High Wider; S-Series; W/O High Wider Pkg.; Right
- Location: Passenger Side
- Other Names: Axle Assembly, Output Shaft
- Item Dimensions: 6.2 x 6.2 x 29.4 inches
- Item Weight: 16.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26055048
- Part Description: 2001 Chevrolet Blazer Front Wheel Drive Shaft Kit
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: 2WD; S-Series; 2WD; Blazer
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 27.8 x 11.4 x 10.1 inches
- Item Weight: 15.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Rear Axle Drive Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 4WD, Inner; S-Series
- Other Names: Axle Shaft, Driven Shaft, Output Shaft
- Item Dimensions: 8.9 x 3.6 x 3.5 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Front Drive Axle Clutch Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 4WD, 4WD, Outer; S-Series
- Location: Driver Side
- Other Names: Axle Shaft, Shaft
- Item Dimensions: 16.5 x 3.7 x 3.4 inches
- Item Weight: 4.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Front Drive Axle Inner Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 4WD, 1997-05, W/High Wider; S-Series; W/High Wider Pkg.; Left
- Location: Driver Side
- Other Names: Axle Assembly
- Item Dimensions: 28.9 x 6.0 x 6.0 inches
- Item Weight: 17.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Front Wheel Drive Shaft Kit
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: 4WD, 1997-05, W/High Wider; S-Series; W/High Wider Pkg.; Right
- Location: Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 34.2 x 5.3 x 5.2 inches
- Item Weight: 17.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Front Wheel Drive Shaft Kit
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: 4WD, 1997-05, W/O High Wider; S-Series; W/O High Wider Pkg.; Left
- Location: Driver Side
- Other Names: Axle Assembly, Output Shaft
- Item Dimensions: 29.3 x 5.8 x 5.7 inches
- Item Weight: 19.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Front Wheel Drive Shaft Kit
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 4WD, AWD, Outer
- Location: Driver Side
- Item Dimensions: 7.9 x 7.5 x 7.7 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Differential Shaft Assembly
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 4WD, 4WD, Outer; S-Series
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 24.4 x 4.6 x 4.7 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Front Drive Axle Inner Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: 4WD, AWD, Outer
- Location: Passenger Side
- Other Names: Axle Shaft, Inner Joint Assembly, Output Shaft
- Item Dimensions: 17.4 x 6.5 x 6.6 inches
- Item Weight: 6.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Shaft Kit, Front Drive Axle Inner
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme | 6 Cyl 4.3 L GAS
Product Specifications- Notes: All
- Part Description: 2001 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 4WD, 3.08 Ratio (gu4), Stamped Ztm; S-Series; W/4.3l
- Part Description: 2001 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: 4WD, 3.42 Ratio (gu6), Stamped Ztu
- Part Description: 2001 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: 4WD, 3.73 Ratio (gt4), Stamped Ztp
- Part Description: 2001 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: 4WD, 3.73 Ratio (gt4), Stamped Ztr
- Part Description: 2001 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: 4WD, 3.73 Ratio (gt4), Stamped Ztx; S-Series
- Part Description: 2001 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: S-Series; W/O High Wider Pkg.
- Part Description: 2001 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: S-Series; W/High Wider Pkg.
- Part Description: 2001 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
Product Specifications- Notes: S-Series; 4WD; Blazer; 2 Door
- Other Names: Drive Shaft
- Item Weight: 14.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Propeller Shaft Assembly
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: S-Series
- Other Names: Drive Shaft
- Item Dimensions: 39.2 x 4.0 x 3.7 inches
- Item Weight: 15.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Propeller Shaft Assembly
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- Product Specifications
- Notes: S-Series; 4WD; Blazer; 4 Door
- Other Names: Drive Shaft
- Item Dimensions: 48.2 x 3.8 x 3.8 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Blazer Drive Shaft
Vehicle Fitment- 2001 Chevrolet Blazer | Base, LS, LT, Trailblazer, ZR2 | 6 Cyl 4.3 L GAS
1-30 of 34 Results
< Previous
12
Next >