< Back ×
2001 Chevrolet Metro Alternator
My Vehicle Change Vehicle
2001 Chevrolet Metro
< Back to View All
Alternators, Batteries & Starters
- Department
- Amperage Rating
- Condition
- Pulley Belt Type
- Voltage
- Brands
- Prices
$112.85Product Specifications- Amps: 55 Amps
- Clock: 11:30
- Fan: Internal
- Manufacturer: Mitsubishi
- Pulley: 4 Groove Serpentine
- Regulator: Internal
- Rotation: Clockwise
- UPC: 029175957780
- Volts: 12 Volts
- Part Description: Alternator Remanufactured
Product Specifications- Notes: 55 Amp; OE Equivalent
- Amperage Rating: 55 Amp
- Family: Mitsubishi
- Fan Type: Internal
- OE Part Number: A5T07091, A5TA0791, 3140060A21REM, A5T07091ZC, A5TA0791ZC, A5TA0791A, 3140060A21, 3140050G10, A5T07091A
- Regulator Type: Internal
- Rotation Direction: Clockwise
- UPC: 042511083134
- Voltage: 12V
- Part Description: Remanufactured Alternator
Product Specifications- Notes: 55 Amps
- Amp Rating: 55
- Fan Type: Internal
- New or Remanufactured: Remanufactured
- OE Manufacturer: Mitsubishi
- One Wire Capable: NO
- Part Status: Superseded to 14820
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 4
- Pulley Included: Yes
- Pulley Outside Diameter: 55
- Regulator Type: Internal
- Rotation Direction: Clockwise
- Voltage [V]: 12
- Part Description: Premium Remanufactured Alternator
Product Specifications- Notes: Metro; 1.3 Liter
- Other Names: Alternator
- Item Dimensions: 12.2 x 9.8 x 7.7 inches
- Item Weight: 10.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: GENERATOR Assembly
FAQ for Alternator Repair
Q: What is the removal procedure for the generator?
A:
You need to disconnect the negative battery cable, remove the air cleaner assembly, the rubber insulator, the nut, and the electrical connector from the generator B+ terminal, and remove the upper mounting bolt, the drive belt, the 2 lower generator mounting bolts, and the generator.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the generator bolts?
A:
The recommended torque is 23 Nm (17 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How to remove the brushes from the regulator?
A:
You need to remove the brush lead wire cover, heat and disconnect the brush lead wires from the regulator terminals, and remove the brushes and the brush springs from the regulator.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the generator housing bolts?
A:
The recommended torque is 30 Nm (22 lb-ft).
By Bob
GM Specialist
28/10/2022