< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Metro
< Back to View All
Brake Pads, Discs & Calipers
- Department
- Brands
- Prices
Centric® GCX Plain 1-Piece Front Brake Rotor for 2001 Chevrolet Metro
PartNumber: 320.48001FProduct Specifications- UPC: 889590390407
- Part Description: GCX Plain 1-Piece Front Brake Rotor
$24.35
DuraGo® Vented Front Brake Rotor for 2001 Chevrolet Metro
PartNumber: BR31015Product Specifications- Bolt Circle: 114.3mm (4.5")
- Center Hole Diameter: 64mm (2.52")
- Lug Holes Quantity: 4
- Lug Holes Size: 12.6mm (0.50")
- Minimum Thickness: 15mm (0.59")
- Nominal Thickness: 17mm (0.67")
- Quantity: 1 Per Pack
- Rotor Construction: 1-Piece
- Rotor Design: Rotors Only
- Rotor Diameter: 231.3mm (9.11")
- Rotor Height: 49.8mm (1.96")
- Rotor Style: Plain
- Rotor Vane Type: Non-Directional
- UPC: 756632103779
- Part Description: Vented Front Brake Rotor
$18.17
OEM (Genuine) 2001 Chevrolet Metro Front Brake Rotor
PartNumber: 91175503
Product Specifications- Location: Passenger Side; Driver Side
- Other Names: Brake Rotor, Rotor
- Item Dimensions: 9.4 x 9.3 x 2.1 inches
- Item Weight: 7.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91172987, 96067908
- Part Description: Front Brake Rotor
FAQ for Brake Disc Repair
Q: What is the removal procedure for the brake rotor?
A:
You need to siphon two-thirds of the fluid from the master cylinder reservoir, raise and support the vehicle, remove the tire and wheel assembly, position the C-clamp around the outer pad and caliper, remove the brake pads and the caliper from the caliper carrier, remove the brake caliper bracket, the two rotor screws, the rotor from the wheel hub.
By Bob
GM Specialist
01/11/2022Q: What is the procedure for refinishing rotors?
A:
You need to clean the wheel bearing and the wheel bearing hub, measure the thinnest point of the brake rotor, clean the rust from the brake rotor flange, refinish the brake rotor, create a non-directional braking surface, and clean the braking surfaces.
By Bob
GM Specialist
01/11/2022Q: How to install the brake rotor?
A:
You need to clean the hub, install the rotor to the wheel hub, install the caliper carrier, the brake pads, and the caliper and the tire and wheel assembly, lower the vehicle and fill the master cylinder fluid reservoir.
By Bob
GM Specialist
01/11/2022Q: What should we do after the linings have been replaced and/or the rotors have been refinished?
A:
You should break in or burnish the new braking surface. This can be accomplished by making 20 stops from 48 km/h (30 mph), using medium to firm brake pedal pressure. Do not overheat the brakes.
By Bob
GM Specialist
01/11/2022