< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Metro
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2001 Chevrolet Metro Latch, Hood Primary & Secondary
PartNumber: 30013848
Product Specifications- Other Names: Lock
- Item Dimensions: 7.2 x 4.4 x 4.4 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: Latch, Hood Primary & Secondary
FAQ for Hood Latch Repair
Q: What is the recommended torque for the hood latch bolts?
A:
The recommended torque is 7 Nm (62 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the hood front seal?
A:
You need to install the front hood seal to the vehicle, secure the seal with the 9 plastic retainers, and lower the hood.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood front seal?
A:
You need to raise and suitably support the hood, and remove the front hood seal from the hood by removing the 9 plastic retainers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the windshield wiper arm nuts?
A:
The recommended torque is 20 Nm (15 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood hinge?
A:
You need to remove the hood, the wiper arm nut cap, the windshield wiper arm nut, the windshield wiper arms from the windshield wiper transmission, the rear hood seal, the retainers that retain the air inlet grille panel, the air inlet grille panel, the 2 bolts, and the hood hinge.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood rear seal?
A:
You need to raise and suitably support the hood, and remove the rear hood seal from the hood by removing the 10 plastic retainers.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood's primary and secondary latch?
A:
You need to raise and suitably support the hood, mark the position of the bolts to the hood latch, and remove the 3 bolts, the hood latch, and the hood latch release cable.
By Bob
GM Specialist
01/11/2022Q: How to install the hood rear seal?
A:
You need to install the rear hood seal to the vehicle, secure the seal with the 10 plastic retainers, and lower the hood.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood bumper?
A:
You need to raise and suitably support the hood, unscrew the hood's front bumper, and remove the bumper.
By Bob
GM Specialist
01/11/2022Q: How to install the hood bumper?
A:
You need to screw the hood front bumper, adjust the vertical adjustment of the bumpers by turning the bumper, and lower the hood.
By Bob
GM Specialist
01/11/2022See more FAQs (5)