< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Metro
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2001 Chevrolet Metro Molding, Windshield Side Upper Garnish *Gray
PartNumber: 30013735
Product Specifications- Notes: Sedan
- Location: Driver Side
- Other Names: Weatherstrip Pillar Trim, Windshield Pillar Trim
- Item Dimensions: 29.3 x 12.2 x 4.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: Molding, Windshield Side Upper Garnish *Gray
OEM (Genuine) 2001 Chevrolet Metro Molding, Windshield Side Upper Garnish *Gray
PartNumber: 30013733Product Specifications- Notes: Sedan
- Location: Passenger Side
- Other Names: Weatherstrip Pillar Trim, Windshield Pillar Trim
- Item Dimensions: 37.4 x 4.6 x 4.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: Molding, Windshield Side Upper Garnish *Gray
FAQ for Pillar Panels Repair
Q: What is the removal procedure for the center pillar upper trim panel?
A:
You need to remove the center pillar lower trim panel from the vehicle by gently prying the panel loose, loosening the door opening lace on both sides of the center pillar upper trim panel, and removing the plastic retainer and the center pillar upper trim panel.
By Bob
GM Specialist
02/11/2022Q: How to install the center pillar lower trim panel?
A:
You need to install the center pillar lower trim panel to the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to install the body side rear trim panel (4-Door)?
A:
You need to reposition the rear back seat side trim, snap the trim into place, install the plastic retaining clip, reposition the carpet over the plastic retaining clip, clip the rear seat into place, install the 3 plastic retaining clips, and reposition the partition trim and the rear seat.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the center pillar lower trim panel?
A:
You need to remove the center pillar lower trim panel from the vehicle by gently prying the panel loose.
By Bob
GM Specialist
02/11/2022Q: How to install the center pillar upper trim panel?
A:
You need to install the center pillar upper trim panel to the vehicle, press the door opening lace into place on both sides of the trim panel, and install the center pillar lower trim panel to the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the body side rear trim panel (2-Door)?
A:
You need to open the liftgate, lower the rear seat, fold back the carpet and the spare tire cover to gain access to the trim panel plastic retaining clips, remove the 4 screws that secure the quarter panel inner front trim, the absorber cap from the rear quarter panel trim and the 2 plastic retaining clips that secure the rear quarter panel trim, and the rear quarter panel trim.
By Bob
GM Specialist
02/11/2022Q: How to install the body side rear trim panel (2-Door)?
A:
You need to install the rear quarter panel trim, the absorber cap to the rear quarter panel trim, and the rear quarter panel trim to the quarter panel inner front trim, reposition the carpet and the spare tire cover, reposition the rear seat, and close the liftgate.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the body side rear trim panel (4-Door)?
A:
You need to lower the rear seat, remove the 3 plastic retaining clips, unclip the partition, the rear seat bottom, and the rear carpet, remove the plastic retaining clip, and unclip the rear back seat side trim.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the front side door water deflector?
A:
You need to remove the front door trim panel and the water deflector from the door.
By Bob
GM Specialist
01/11/2022Q: How to install the rear door panel?
A:
You need to connect the power window switch connector, position the rear side door trim to the rear door, press the door trim retainers into position, install the rear door pull handle to the door trim, the inside handle bezel, and the snap ring to the window-regulator handle, set the regulator handle, and install the regulator handle and the rear door molding to the door.
By Bob
GM Specialist
01/11/2022See more FAQs (11)