< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Metro
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2001 Chevrolet Metro Cushion, Driver Seat
PartNumber: 91171519
Product Specifications- Notes: Lower
- Location: Driver Side
- Other Names: Seat Cushion
- Item Weight: 10.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: Cushion, Driver Seat
OEM (Genuine) 2001 Chevrolet Metro Cushion, Rear Seat
PartNumber: 91171545Product Specifications- Notes: Bench Type, Sedan, Lower
- Other Names: Seat Cushion
- Item Weight: 6.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: Cushion, Rear Seat
OEM (Genuine) 2001 Chevrolet Metro Pad, Rear Seat Back Cushion
PartNumber: 91171552Product Specifications- Notes: Bench Type, Sedan, Upper
- Other Names: Seat Cushion
- Item Weight: 15.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: Pad, Rear Seat Back Cushion
OEM (Genuine) 2001 Chevrolet Metro Cushion, Driver Seat Back
PartNumber: 91171532Product Specifications- Notes: Upper
- Location: Driver Side
- Other Names: Seat Cushion
- Item Weight: 9.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: Cushion, Driver Seat Back
OEM (Genuine) 2001 Chevrolet Metro Cushion, Passenger Seat Back
PartNumber: 91171531Product Specifications- Notes: Upper
- Location: Passenger Side
- Other Names: Seat Cushion
- Item Dimensions: 31.6 x 20.4 x 7.4 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: Cushion, Passenger Seat Back
OEM (Genuine) 2001 Chevrolet Metro PAD, Front Seat Cushion
PartNumber: 91171518Product Specifications- Notes: Lower
- Location: Passenger Side
- Other Names: Seat Cushion
- Fitment Type: Direct Replacement
- Part Description: PAD, Front Seat Cushion
FAQ for Seat Cushion Pad Repair
Q: What is the removal procedure for the rear seat back cushion cover and pad (Split)?
A:
You need to remove the rear seat back, the 2 plastic retaining clips and the lock knob, gently open the plastic seal at the bottom of the seat back and roll the rear seat back cover and the carpet off of the seat back.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the rear seat back cushion cover and pad (Bench)?
A:
You need to remove the rear seat back, the 2 plastic retaining clips from the lower outboard corners of the rear seat back, and the 2 lock knobs, gently open the plastic seal at the bottom of the seat back and roll the rear seat back cover and the carpet off of the seat back.
By Bob
GM Specialist
02/11/2022Q: How to install the rear seat back cushion cover and pad (Bench)?
A:
You need to roll the rear seat back cover and the carpet onto the seat back, press the plastic seal together along the bottom of the seat back, install 2 lock knobs to the seat back, the 2 plastic retaining clips to the lower outboard corners of the rear seat back, and the rear seat back.
By Bob
GM Specialist
02/11/2022Q: How to install the rear seat back cushion cover and pad (Split)?
A:
You need to roll the rear seat back cover and the carpet off of the seat back, press the plastic seal together along the bottom of the seat back, install the lock knob to the seat back, and secure the knob by screwing in a clockwise direction, the 2 plastic retaining clips to the lower outboard corners of the rear seat back, and the rear seat back.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the driver or passenger seat back cushion cover?
A:
You need to slide the seat assembly to the farthest rearward position, remove the inboard seat back hinge arm screw, position the seat back forward, roll the cover upward slowly and evenly, and remove the cover from the seat back.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the front seat cushion cover (4 Doors)?
A:
You need to remove the front seat assembly, the 1 screw and the recliner handle, the 2 screws, the seat cushion side panel, the 2 bolts, the 1 nut, and the outboard seat adjuster, remove the 2 bolts, the inboard seat adjuster, the inboard seat back hinge arm screw, the bolt that secures the recliner mechanism, the seat cushion, the hog rings, and the seat cushion cover.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the recliner mechanism mounting bolt?
A:
The recommended torque is 18 Nm (13 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the front seat cushion cover (2 doors)?
A:
You need to remove the front seat assembly, the 1 screw and the recliner handle from the recliner mechanism, and the 2 screws and the seat cushion side panel from each side of the seat, disconnect the easy entry cable, remove the 2 bolts, the 1 nut and the outboard seat adjuster from the seat, remove the following components from the seat, remove the 2 bolts and the inboard seat adjuster, the inboard seat back hinge arm screw, the bolt that secures the recliner mechanism to the seat cushion, the seat cushion, the hog rings, and the seat cushion cover.
By Bob
GM Specialist
02/11/2022Q: How to install the driver or passenger seat back cushion cover?
A:
You need to roll the cover down onto the seat back, install the inboard seat back hinge arm screw to the seat assembly, and return the seat back to the upright position.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the rear seat cushion?
A:
You need to disengage the 2 plastic snaps, remove 4 plastic retaining clips along the forward edge of the luggage compartment floor, place the rear seat back in the folded position, lift the carpet over the rear seat back, remove 1 screw from each rear retaining clip, raise the seat cushion at the front edge to disengage the front retaining clips, slide the seat cushion over the seat belt buckles, and remove the seat cushion from the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (16)