< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Venture
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2001 Chevrolet Venture Cooler Line
PartNumber: 10324809
Product Specifications- Notes: Trans Cooler, Outlet
- Other Names: Cooler Line, Hose
- Item Dimensions: 8.5 x 7.4 x 35.0 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10304787
- Part Description: 2001 Chevrolet Venture Cooler Line
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$59.51 MSRP:$98.54You Save: $39.03 (40%)
OEM (Genuine) 2001 Chevrolet Venture Upper Hose
PartNumber: 89023429
Product Specifications- Notes: All Models
- Other Names: Lower Hose
- Item Dimensions: 13.0 x 6.5 x 6.4 inches
- Item Weight: 1.50 Pounds
- Replaced by: 19302690
- Part Description: 2001 Chevrolet Venture Upper Hose
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$30.07 MSRP:$45.37You Save: $15.30 (34%)
OEM (Genuine) 2001 Chevrolet Venture Cooler Line
PartNumber: 10324808
Product Specifications- Notes: Trans Cooler, Inlet
- Other Names: Cooler Line, Hose
- Item Dimensions: 35.2 x 14.8 x 2.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10304786
- Part Description: 2001 Chevrolet Venture Cooler Line
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$55.26 MSRP:$91.51You Save: $36.25 (40%)
OEM (Genuine) 2001 Chevrolet Venture Radiator Outlet Hose (Lower)
PartNumber: 89023430
Product Specifications- Notes: All Models
- Other Names: Lower Hose
- Item Dimensions: 16.7 x 6.4 x 3.3 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88894252, 10352408
- Part Description: 2001 Chevrolet Venture Radiator Outlet Hose (Lower)
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Coolant Hose Repair
Q: What kind of special tools will be required when serving the throttle body heater hoses-inlet?
A:
The tools required include J38185 Hose Clamp Pliers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the thermostat bypass pipe nut?
A:
The recommended torque is 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to remove the throttle body heater hoses-inlet?
A:
You need to remove the air cleaner and duct assembly, remove the throttle cable bracket to gain access to the throttle body heater hose clamp, drain the coolant until the coolant level is below the throttle body heater hoses, then remove the hose clamp, and remove the throttle body heater inlet hose.
By Bob
GM Specialist
01/11/2022Q: How to remove the thermostat bypass pipes?
A:
You need to drain the cooling system, remove the spark plug wire harness from the thermostat bypass pipe, remove the thermostat bypass pipe to throttle body nut, then remove the thermostat bypass pipe to throttle body hose clamps, remove the thermostat bypass pipe to cylinder head nut, remove the thermostat bypass pipe bolt, the thermostat bypass pipe hose clamp, the thermostat bypass pipe hose, and the thermostat bypass pipe.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the throttle body heater hoses-inlet?
A:
You should install the throttle body heater inlet hose, the hose clamps, and the throttle cable bracket, then fill the cooling system, and install the air cleaner and duct assembly.
By Bob
GM Specialist
01/11/2022