2001 Chevrolet Venture Washer Pump

You should insert the hook of the wiper arm through the opening in the Wiper Blade, position the wiper blade pivot in the inside radius of the wiper arm hook, then pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook, and operate the wipers and check for proper operation.

The recommended torque is 6 N.m (53 lb in).

You need to route the rear washer hose along the right side of the vehicle, apply lubricant to the rear washer hose ends, then install the rear washer hose end through the opening in the dash panel, connect the rear washer hose to the washer solvent container, connect the rear washer hose end to the rear washer pump, and route the rear washer hose opposite end through the rear liftgate conduit, connect the rear washer hose to the rear washer nozzle, then position the rear washer nozzle to the liftgate, install the rear washer nozzle to the liftgate, install the wiper linkage cover, the rear hood seal, the liftgate trim panel, the rear lower quarter trim panel, then install the lower pillar garnish molding, and the right cowl trim panel.