< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Venture
< Back to View All
Wipers & Washers
- Department
- Location
- Brands
- Prices
OEM (Genuine) 2001 Chevrolet Venture Wiper Motor
PartNumber: 12368685
Product Specifications- Other Names: Wiper Motor
- Item Dimensions: 9.8 x 9.6 x 6.3 inches
- Item Weight: 4.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12365393, 22144768
- Part Description: 2001 Chevrolet Venture Wiper Motor
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$270.36 MSRP:$510.14You Save: $239.78 (48%)
Cardone Reman® Remanufactured Wiper Motor for 2001 Chevrolet Venture
PartNumber: 40-1026Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 2.5 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2001 Chevrolet Venture Remanufactured Wiper Motor
Vehicle Fitment- 2001 Chevrolet Venture | All Trims | All Engines
$54.65
Cardone Reman® Remanufactured Wiper Motor for 2001 Chevrolet Venture
PartNumber: 40-1025Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 3.38 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2001 Chevrolet Venture Remanufactured Wiper Motor
Vehicle Fitment- 2001 Chevrolet Venture | All Trims | All Engines
$50.86
WAI Global® Front Windshield Wiper Motor for 2001 Chevrolet Venture
PartNumber: WPM1025Product Specifications- UPC: 609843963031
- Part Description: 2001 Chevrolet Venture Front Windshield Wiper Motor
Vehicle Fitment- 2001 Chevrolet Venture | All Trims | All Engines
$49.02
WAI Global® Rear Back Glass Wiper Motor for 2001 Chevrolet Venture
PartNumber: WPM1026Product Specifications- UPC: 609843963048
- Part Description: 2001 Chevrolet Venture Rear Back Glass Wiper Motor
Vehicle Fitment- 2001 Chevrolet Venture | All Trims | All Engines
OEM (Genuine) 2001 Chevrolet Venture Motor & Bracket
PartNumber: 19329716
Product Specifications- Notes: All Models
- Other Names: Motor Bracket, Wiper Motor
- Item Dimensions: 14.4 x 10.1 x 6.7 inches
- Item Weight: 3.30 Pounds
- Replaced by: 19332589
- Part Description: 2001 Chevrolet Venture Motor & Bracket
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Windshield Wiper Motors Repair
Q: What is the proper way to install the wiper motor cover?
A:
You should install the wiper motor cover onto the wiper motor, and install the wiper motor cover to wiper motor screws, then install the wiper motor onto the vehicle, then operate the wipers and check for proper operation.
By Bob
GM Specialist
01/11/2022Q: How to install the wiper motor module?
A:
You need to install the insulators onto the wiper motor module, align the wiper motor module to the air inlet panel, install the air inlet panel to the wiper motor module screws, then install the wiper motor, the air inlet grille panel, install the wiper arms onto the vehicle, finally inspect the wipers for proper operation.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the drive link screws?
A:
The recommended torque is 5 N.m (44 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the wiper motor?
A:
You need to align the wiper motor to the wiper drive system module, install the wiper drive system module to the wiper motor screws, connect the electrical connector to the wiper motor, then install the crank arm on the wiper motor, rotate the washer solvent container into the installation position, and install the washer solvent container screws, inspect the wipers for proper operation.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wiper motor crank arm screw?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear wiper motor drive shaft to the rear wiper motor nut?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the washer solvent container screws?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear wiper motor to liftgate screws?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the wiper motor crank arm onto the wiper motor?
A:
You need to turn the ignition switch to the ACCY position, and set the wiper switch to the PULSE position. The wiper motor should be operating, then turn the ignition switch to OFF when the wiper motor is in the inner wire position.
By Bob
GM Specialist
01/11/2022Q: How to remove the wiper motor cover?
A:
You need to remove the wiper motor, remove the wiper motor cover to the wiper motor screws, then remove the wiper motor cover from the wiper motor.
By Bob
GM Specialist
01/11/2022See more FAQs (8)