Part Description: 2001 GMC Savana 1500 Seal, A/C Evaporator
More Info
Vehicle Fitment
2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
FAQ for A/C System Seal Kit Repair
Q: What is the removal procedure for the O-ring?
A:
You need to recover the refrigerant, use a backup wrench on the A/C refrigerant component fitting, loosen the A/C refrigerant hose fitting, remove the bolt retaining the A/C refrigerant hose to the A/C refrigerant component, disconnect the A/C refrigerant hose, discard the O-ring seal and cap or tape the A/C refrigerant hose and the A/C refrigerant component.
By Bob
GM Specialist
28/10/2022
Q: What is the procedure for banjo-style fittings?
A:
The procedure is to carefully slide the new O-ring seal onto the A/C refrigerant hose until seated, and leave a light coating of the refrigerant oil to remain on the A/C refrigerant hose in the area indicated only.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: How to install the blower motor resistor in the auxiliary?
A:
You need to install the Blower Motor Resistor to the blower case and the retaining screws, connect the electrical connector to the blower motor resistor, and install the left rear quarter trim panels.
Q: How to install the heater core in the auxiliary?
A:
You need to install the Heater Core to the case, the screws to the bottom of the auxiliary heater case, the auxiliary heater case, and the left rear quarter trim panel.
Q: How to install the heater pipe in the auxiliary front?
A:
You need to install the front inlet and outlet pipe, the retainers, the Heater Hose connections to the intermediate pipe, the heater hose connections, the heat shields, and the exhaust system, and fill the engine coolant.