< Back ×
My Vehicle Change Vehicle
2001 GMC Savana 1500
< Back to View All
Ignition, Distributors & ECM
- Department
- Brands
- Prices
Delphi® Ignition Distributor for 2001 GMC Savana 1500
PartNumber: CZ20008Product Specifications- Advance Type: Computer Controlled
- Coil Wire Included: No
- Color: Black
- Distributor Cap Included: Yes
- Grade Type: Regular
- Ignition Coil Included: No
- Ignition Rotor Included: Yes
- Interface Description: 3 Pin Sealed Connector, 1 HV tower to Coil, 8 HV Towers to Plugs via Wire Sets
- Operation Type: HVS Distributor
- UPC: 689604125380
- Part Description: 2001 GMC Savana 1500 Ignition Distributor
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | 8 Cyl 5.0L
- 2001 GMC Savana 1500 | All Trims | 8 Cyl 5.7L
$278.00
Cardone Reman® Remanufactured Electronic Distributor for 2001 GMC Savana 1500
PartNumber: 30-1829Product Specifications- Notes: Electronic Distributor
- Coil Wire Included: No
- Color: Gray
- Cylinders: 8
- Distributor Cap Included: No
- Distributor Type: Hall Effect
- E-Waste: Yes
- Electronic Module Supplied: No
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
- UPC: 082617442084
- Part Description: 2001 GMC Savana 1500 Remanufactured Electronic Distributor
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | 8 Cyl 5.0L
- 2001 GMC Savana 1500 | All Trims | 8 Cyl 5.7L
$93.58
Delphi® Ignition Distributor for 2001 GMC Savana 1500
PartNumber: CZ20007Product Specifications- Advance Type: Computer Controlled
- Coil Wire Included: No
- Color: Black
- Distributor Cap Included: Yes
- Grade Type: Regular
- Ignition Coil Included: No
- Ignition Rotor Included: Yes
- Interface Description: 3 Pin Sealed Connector, 1 HV tower to Coil, 6 HV Tower to Plugs via Wire Sets
- Operation Type: HVS Distributor
- UPC: 689604125373
- Part Description: 2001 GMC Savana 1500 Ignition Distributor
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | 6 Cyl 4.3L
$185.25
Cardone Reman® Remanufactured Electronic Distributor for 2001 GMC Savana 1500
PartNumber: 30-1639Product Specifications- Notes: Electronic Distributor
- Coil Wire: No
- Color: Black
- Cylinders: 6
- Distributor Cap: No
- Distributor Type: Hall Effect
- Electronic Module Supplied: No
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Part Description: 2001 GMC Savana 1500 Remanufactured Electronic Distributor
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | 6 Cyl 4.3L
$70.58
OEM (Genuine) 2001 GMC Savana 1500 Distributor Asm
PartNumber: 12598210
Product Specifications- Notes: 4.3 Liter
- Other Names: Distributor, Distributor Assembly
- Item Dimensions: 15.5 x 8.0 x 5.4 inches
- Item Weight: 2.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1104057, 93441559, 01104078, 01104050, 01104057, 1104078, 1104050
- Part Description: 2001 GMC Savana 1500 Distributor Asm
Vehicle Fitment- 2001 GMC Savana 1500 | Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS
OEM (Genuine) 2001 GMC Savana 1500 Distributor Assembly
PartNumber: 94672691
Product Specifications- Notes: 5.0, 5.7 Liter; Gas Engine, 5.7, 7.4 Liter
- Other Names: Distributor, Distributor Assembly, Starter
- Item Dimensions: 8.2 x 5.1 x 15.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 93441558, 1103977, 1104079, 1104051, 12570425, 01104051, 01104079, 01104058, 1104058
- Part Description: 2001 GMC Savana 1500 Distributor Assembly
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
Spectra Premium® Ignition Distributor for 2001 GMC Savana 1500
PartNumber: GM01Product Specifications- Material: Aluminum
- OE Part Number: 1104051, 1104058, 1104079, 12570425, 93441558
- Spark Plug Terminal Quantity: 8
- UPC: 874183001297
- Part Description: 2001 GMC Savana 1500 Ignition Distributor
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | 8 Cyl 5.0L
- 2001 GMC Savana 1500 | All Trims | 8 Cyl 5.7L
Spectra Premium® Distributor for 2001 GMC Savana 1500
PartNumber: GM02Product Specifications- UPC: 874183001792
- Part Description: 2001 GMC Savana 1500 Distributor
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | 6 Cyl 4.3L
FAQ for Distributor Repair
Q: How to inspect the internal components of the distributor ignition system?
A:
You need to inspect the distributor cap the distributor rotor and the distributor base.
By Bob
GM Specialist
29/10/2022Q: What is the disassembly procedure for the distributor overhaul?
A:
You need to turn off the ignition, remove the engine cover, the distributor, the screws, and the rotor, note the locating holes, line up the square-cut hole in the vane wheel, remove and discard the screws retaining the CMP sensor, remove the CMP sensor, note the dimple located below the roll pin hole on one side of the gear, support the distributor drive gear, drive out the roll pin, remove the driven gear, the round washer, the tang washer, the shim washer, and the old oil seal gasket.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the distributor hold-down bolt?
A:
The recommended torque is 3 Nm (27 lb in).
By Bob
GM Specialist
29/10/2022Q: How to diagnose the carbon tracks?
A:
The procedure is to remove the engine cover, turn OFF the ignition, remove the cap, place 1 lead from the DMM on a cap terminal, probe all other terminals and the center carbon ball, move the base lead to the next terminal, and continue this procedure until you test all the secondary terminals.
By Bob
GM Specialist
29/10/2022Q: What is the inspection procedure for the distributor?
A:
You need to inspect the cap for cracks, tiny holes, or carbon tracks between the cap terminal traces, inspect the cap for the excess build-up of corrosion on the terminals, inspect the rotor segment for excess wear and the shaft for shaft-to-bushing looseness:.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for new screws for the CMP sensor.?
A:
The recommended torque is 2.2 Nm (20 lb in).
By Bob
GM Specialist
29/10/2022Q: What is the test procedure for camshaft retard offset?
A:
The procedure is to connect the scan tool with the ignition off, start the engine, allow the engine to idle, increase the engine speed to 1,000 RPM, and monitor the Cam Retard Offset. The distributor is properly adjusted if the Cam Retard indicates a value of 0 degrees, and the distributor must be adjusted if the Cam Retard does not indicate 0 degrees.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the distributor?
A:
You need to turn off the ignition, remove the engine cover, the spark plug wires, the electrical connector, and the screws that retain the distributor cap, discard the screws, remove the distributor cap, mark the position of the rotor and the distributor housing and the intake manifold, remove the mounting clamp and hold-down bolt and the distributor, watch the rotor move in a counter-clockwise direction about 42 degrees, note the position of the rotor segment, and place a second mark on the base of the distributor.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the new distributor cap screws?
A:
The recommended torque is 2.4 Nm (21 lb in).
By Bob
GM Specialist
29/10/2022See more FAQs (4)