< Back ×
My Vehicle Change Vehicle
2001 GMC Savana 1500
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 2001 GMC Savana 1500
PartNumber: 20-8756Product Specifications- Notes: In-Line filter available;without Aftermarket Filtration Improvement;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 2001 GMC Savana 1500 Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | All Engines
$48.09
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2001 GMC Savana 1500
PartNumber: 20-1026Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2001 GMC Savana 1500 Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | All Engines
$43.89
OEM (Genuine) 2001 GMC Savana 1500 Pump Asm, P/S
PartNumber: 19168953
Product Specifications- Notes: 1/2 Ton
- Other Names: Power Steering Pump
- Item Dimensions: 9.3 x 6.8 x 6.8 inches
- Item Weight: 9.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26070078
- Part Description: 2001 GMC Savana 1500 Pump Asm, P/S
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
FAQ for Power Steering Pump Repair
Q: What is the recommended torque for the connector and fitting assembly?
A:
The recommended torque is 75 Nm (55 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear bracket?
A:
The recommended torque is 50 Nm (37 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to install the power steering pulley?
A:
You need to place the power steering pump pulley on the end of the power steering pump shaft and install the power steering pump pulley.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the power steering pump rear bracket (4.3,5.0 and 5.7L engines)?
A:
You need to remove the power steering pump and the retaining nuts from the vehicle, and the brace from the back side of the pump.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the power steering pump (4.3,5.0 and 5.7L engines)?
A:
You need to remove the power steering pump pulley, place a drain pan below, disconnect the power steering pressure hose, the power steering return hose, and the reservoir outlet hose, cap the ends of the hose and the pump, remove the power steering pump mounting bolts and the nut, the accessory mounting bracket mounting bolts and nuts, pull the accessory bracket forward, and remove the power steering pump.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the power steering pulley?
A:
You need to remove the upper fan shroud, the drive belt, and the power steering pump pulley.
By Bob
GM Specialist
01/11/2022Q: What is the disassembly procedure for the power steering pump flow control valve-off vehicle?
A:
You need to drain the oil from the reservoir, remove the connector and fitting assembly and the control valve assembly from the pump housing, and remove and discard the O-ring seal from the connector and fitting assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the power steering pump rear bracket (4.3,5.0 and 5.7L engines)?
A:
You need to install the brace to the back side of the pump, the steering pump brace retaining nuts to the vehicle, and the steering pump to the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (3)