< Back ×
2001 GMC Savana 1500 Side Marker Lights
My Vehicle Change Vehicle
2001 GMC Savana 1500
< Back to View All
Signal Lights
- Department
- Prices
OEM (Genuine) 2001 GMC Savana 1500 Side Marker Lamp
PartNumber: 5977276$22.11 MSRP:$33.37You Save: $11.26 (34%)Product Specifications- Notes: W/Sealed Beam Headlamp
- Location: Passenger Side
- Other Names: Side Marker Lamp
- Item Dimensions: 5.2 x 11.3 x 0.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Savana 1500 Side Marker Lamp
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
OEM (Genuine) 2001 GMC Savana 1500 Side Marker Lamp
PartNumber: 5977275$21.56 MSRP:$32.54You Save: $10.98 (34%)Product Specifications- Notes: W/Sealed Beam Headlamp
- Location: Driver Side
- Other Names: Side Marker Lamp
- Item Dimensions: 11.3 x 4.2 x 1.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Savana 1500 Side Marker Lamp
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
Product Specifications- Notes: W/Composite Headlamp, GMC
- Location: Driver Side
- Other Names: Side Marker Lamp
- Item Dimensions: 6.0 x 5.1 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Savana 1500 Lamp Asm-Front Side Marker
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Product Specifications
- Notes: W/Composite Headlamp, GMC
- Location: Passenger Side
- Other Names: Side Marker Lamp
- Item Dimensions: 6.6 x 5.8 x 1.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Savana 1500 Lamp Asm-Front Side Marker
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
FAQ for Side Marker Lights Repair
Q: How to install the marker lamp-Side 2?
A:
You need to connect the bulb to the socket, connect the bulb socket to the side marker lamp, install the side marker lamp or the reflector, and install the side marker lamp or reflector retaining screw.
By Bob
GM Specialist
01/11/2022Q: How to install the stepwell lamp?
A:
You need to connect the bulb to the socket, install the stepwell lamp lens to the stepwell mat, and the stepwell lamp lens retaining screw.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the marker lamp-Side 2?
A:
You need to remove the screw that retains the side marker or the reflector to the radiator grille, remove the side marker lamp or the reflector, disconnect the bulb socket from the side marker lamp, and remove the bulb from the socket.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the stepwell lamp?
A:
You need to remove the screw from the stepwell lamp lens, the stepwell lamp lens from the stepwell mat, and the bulb from the socket.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the side marker lamp retaining screw?
A:
The recommended torque is 1.5 Nm (13 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the marker lamp-Side 1?
A:
You need to remove the screw that retains the front side marker lamp to the radiator grille, lift the side marker lamp up and out to disengage the tab, disconnect the bulb socket from the side marker lamp, and remove the bulb from the socket.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the position lamp in the front?
A:
You need to remove the screws, the retaining ring, the headlamp capsule, the bulb, and the socket, push in on the side of the bulb and turn the bulb 1/4 turn counterclockwise, and remove the bulb from the socket.
By Bob
GM Specialist
01/11/2022Q: How to install the position lamp in the front?
A:
You need to install the bulb, push in on the bulb and turn 1/4 turn clockwise, install the bulb and socket into the rubber grommet, install the headlamp capsule, the retaining ring to the headlamp housing assembly, and the screws holding the retaining ring to the headlamp housing assembly.
By Bob
GM Specialist
01/11/2022See more FAQs (3)