Part Description: 2001 GMC Yukon XL 1500 Front Side Door Lock Assembly *Marked Print
More Info
Vehicle Fitment
2001 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Door Lock Repair
Q: How to deal with the condition that the manual lock lever comes loose from the door trim panel?
A:
You shall replace the manual lock lever with P/N 15172121. The new lock lever has a revised retaining bar.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be learned about while servicing the door hinge pin and bushing-rear door?
A:
The Door Hinge pins and bushings are not replaceable. If the hinge pins or bushings are damaged, you shall replace the door hinge as an assembly.
Q: How to remove the rear side door lock actuator?
A:
The proper way is to remove the door trim panel and the water deflector, disconnect the inside door lock rod, the manual door lock rod, and the cylinder lock rod, and remove the Door Lock Actuator and control rods as an assembly.
Q: What is the installation procedure for the door lock switch?
A:
The procedure is to install the power door lock and power window switch assembly, and the screws to the Door Lock Switch, connect the electrical connector to the door lock switch and install the power accessory switch plate.