Notes: Front Bench Seat, Passenger Seat; Front Bench Seat, Driver Side; Bucket Seat, Driver Side, 6 Way Adjust; All Models; Driver Seat; 6 Way Power Seat;All Models; Passenger Seat; 6 Way Power Seat
Location: Passenger Side; Driver Side
Other Names: Adjuster Switch, Seat Switch, Switch
Item Dimensions: 5.1 x 3.0 x 2.1 inches
Item Weight: 0.60 Pounds
Fitment Type: Direct Replacement
Part Description: 2001 GMC Yukon XL 1500 Adjuster Switch
More Info
Vehicle Fitment
2001 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
You shall install the lumbar switch, the lumbar switch screws, and the power seat switch bezel.
By Bob
GM Specialist
01/11/2022
Q: How to remove the front seat adjuster switch knob?
A:
The proper way is to pull outward from the seat to remove. If too tight, a flat-bladed tool may be used to help disengage the knob from the switch.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the rear seat heater switch?
A:
The proper way is to remove the center console end panel, disconnect the electrical connector, and remove the Seat Heater Switch retaining screws and the switch from the vehicle.
Q: What is the removal procedure for the driver seat back cushion heater and passenger seat back cushion heater?
A:
The procedure is to remove the seat and the seat trim cover, peel the seat back heater off the foam pad, and disconnect the seat back heater harness.