< Back ×
2002 Buick LeSabre Heater Hose
My Vehicle Change Vehicle
2002 Buick LeSabre
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
$19.94Product Specifications- Centerline Length (in): 24.3"
- Inside Diameter 1 (in): 0.75"
- Number of Branches: 0
- UPC: 072053561975
- Part Description: 2002 Buick LeSabre Hvac Heater Molded Hose
Vehicle Fitment- 2002 Buick LeSabre | All Trims | 6 Cyl 3.8L
$17.09Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: Y
- End 1 Inside Diameter: 3/4
- End 2 Inside Diameter: 3/4
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 18 1/2
- UPC: 036687183095
- Part Description: 2002 Buick LeSabre Small Id Hvac Heater Hose
Vehicle Fitment- 2002 Buick LeSabre | All Trims | All Engines
$12.58Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 17
- UPC: 036687165091
- Part Description: 2002 Buick LeSabre Small Id Hvac Heater Hose
Vehicle Fitment- 2002 Buick LeSabre | All Trims | All Engines
$23.47Product Specifications- Centerline Length (in): 25.4"
- Inside Diameter 1 (in): 0.61"
- Number of Branches: 0
- UPC: 770075563600
- Part Description: 2002 Buick LeSabre Hvac Heater Molded Hose
Vehicle Fitment- 2002 Buick LeSabre | All Trims | 6 Cyl 3.8L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 3/8
- End 1 Outside Diameter: 11/16
- End 2 Inside Diameter: 3/8
- End 2 Outside Diameter: 11/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 25 1/2
- UPC: 036687930200
- Part Description: 2002 Buick LeSabre Molded Heater Hose
Vehicle Fitment- 2002 Buick LeSabre | All Trims | All Engines
FAQ for Heater Hose Repair
Q: What's the recommended torque for the heater pipe adapter bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the heater hoses?
A:
The removal procedure is to drain the cooling system, remove the fuel injector sight shield, position the J 38185 to remove the heater hose clamps, remove the heater hoses from the heater core, then remove the heater hoses from the heater pipe adapters.
By Bob
GM Specialist
01/11/2022Q: How to remove the heater inlet pipe adapter?
A:
You will need to drain the cooling system, remove the heater hose from the heater inlet pipe adapter using the J 38185, remove the bolt from the heater pipe adapter and remove the heater inlet pipe adapter from the engine.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the heater hoses?
A:
The installation procedure is to install the heater hoses onto the heater pipe adapters, install the heater hoses onto the heater core, position the J 38185 to install the heater hose clamps, install the fuel injector sight shield and fill the cooling system.
By Bob
GM Specialist
01/11/2022