< Back ×
My Vehicle Change Vehicle
2002 Buick LeSabre
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2002 Buick LeSabre Valve Cover
PartNumber: 12590366
Product Specifications- Notes: Bonneville, Lesabre; Left; W/O Supercharger
- Location: Driver Side
- Other Names: Valve Cover
- Item Dimensions: 8.7 x 3.3 x 17.4 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25534753
- Part Description: 2002 Buick LeSabre Valve Cover
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
$60.05 MSRP:$95.35You Save: $35.30 (38%)
Dorman® OE Solutions Rear Valve Cover for 2002 Buick LeSabre
PartNumber: 264-967Product Specifications- Color/Finish: Black
- Height: 2.44"
- Item Grade: Standard Replacement
- Length: 14.75"
- Material: Plastic
- Oil Filler Cap Included: No
- UPC: 019495299929
- Valve Cover Type: Standard
- Width: 4.5"
- Part Description: 2002 Buick LeSabre OE Solutions Rear Valve Cover
Vehicle Fitment- 2002 Buick LeSabre | All Trims | 6 Cyl 3.8L
$47.78
OEM (Genuine) 2002 Buick LeSabre Valve Cover
PartNumber: 12590365
Product Specifications- Notes: Bonneville, Lesabre; Right; W/O Supercharger
- Location: Passenger Side
- Other Names: Valve Cover
- Item Dimensions: 8.4 x 3.4 x 17.6 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25532625
- Part Description: 2002 Buick LeSabre Valve Cover
Vehicle Fitment- 2002 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.8 L GAS
Dorman® OE Solutions Front Valve Cover for 2002 Buick LeSabre
PartNumber: 264-966Product Specifications- Color/Finish: Black
- Height: 2.75"
- Item Grade: Standard Replacement
- Length: 14.75"
- Material: Plastic
- Oil Filler Cap Included: No
- UPC: 019495299912
- Valve Cover Type: Standard
- Width: 4.75"
- Part Description: 2002 Buick LeSabre OE Solutions Front Valve Cover
Vehicle Fitment- 2002 Buick LeSabre | All Trims | 6 Cyl 3.8L
FAQ for Valve Cover Repair
Q: What should be done if the valve rocker arm cover adheres to the cylinder head?
A:
You will need to remove the valve rocker arm cover by bumping the end of the valve rocker arm cover with the palm of your hand or a soft rubber mallet.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the nuts attaching the fuel injector sight shield bracket to the right exhaust manifold studs?
A:
The recommended torque is 30 Nm (22 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to install the left valve rocker arm?
A:
You may need to install the new valve rocker arm cover gasket and make sure that the valve rocker arm cover gasket is seated properly in the valve rocker arm cover groove, install the left valve rocker arm cover to the cylinder head, apply thread lock compound GM P/N 12345493 or equivalent, to the valve rocker arm cover bolt threads, install the left valve rocker arm cover bolts, connect the left spark plug wire harness, install the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the valve rocker arm cover bolts?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By Bob
GM Specialist
01/11/2022