< Back ×
My Vehicle Change Vehicle
2002 Buick Park Avenue
< Back to View All
Windows & Components
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Window Lift Motor for 2002 Buick Park Avenue
PartNumber: 42-129Product Specifications- Notes: Contains Gear;without Regulator;Part numbers may be reversed on some models. Physically check unit off vehicle.
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Through Hole
- Product Condition: Remanufactured
- Product Packing Weight: 2.25 lbs
- Regulator Included: No
- Window Motor Use Location: Rear Right; Rear Left; Front Left
- Wire Quantity: 2
- Part Description: 2002 Buick Park Avenue Remanufactured Window Lift Motor
Vehicle Fitment- 2002 Buick Park Avenue | All Trims | All Engines
$38.16
Cardone Reman® Remanufactured Window Lift Motor for 2002 Buick Park Avenue
PartNumber: 42-128Product Specifications- Notes: without Regulator;Part numbers may be reversed on some models. Physically check unit off vehicle.;Contains Gear
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Through Hole
- Product Condition: Remanufactured
- Product Packing Weight: 2.25 lbs
- Regulator Included: No
- Window Motor Use Location: Rear Left; Front Right; Rear Right
- Wire Quantity: 2
- Part Description: 2002 Buick Park Avenue Remanufactured Window Lift Motor
Vehicle Fitment- 2002 Buick Park Avenue | All Trims | All Engines
$36.50
FAQ for Window Regulator Repair
Q: What is the recommended torque for the fasteners retaining to the latch assembly?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What should you remove to access the rear side door window module?
A:
You need to remove the door trim panel and the water deflector.
By Bob
GM Specialist
01/11/2022Q: How to install the module-front power window?
A:
You need to install the door latch onto the retainer, install the inside door handle and lock rods to the door latch, fasten the inside door handle and lock rods to the latch, install the outside door handle rod onto the retainer, connect the electrical connectors to the door latch, start the fasteners in the module, install the module into the door, next align the fasteners installed in the module with the keyhole slots in the door, then install the remaining fasteners, the 3 fasteners to the latch assembly, the handle and lock rods to the outside door handle, the window, the speaker assembly, the trim panel bracket, the water deflector, the door control module, and the door trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the door latch fasteners?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022