< Back ×
2002 Buick Regal Door Lock
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
Product Specifications- Notes: Regal, Grand Prix; Right
- Location: Passenger Side
- Other Names: Latch, Lock
- Item Dimensions: 6.4 x 3.3 x 3.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16629716
- Part Description: 2002 Buick Regal Latch
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Lock Cylinder Assembly
PartNumber: 15822397$111.29 MSRP:$175.04You Save: $63.75 (37%)Product Specifications- Notes: Regal
- Location: Driver Side; Passenger Side
- Other Names: Lock Cylinder, Lock Cylinder Assembly
- Item Dimensions: 4.1 x 3.4 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12528549, 88955980, 12457616
- Part Description: 2002 Buick Regal Lock Cylinder Assembly
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Lock Solenoid
PartNumber: 16640852$71.35 MSRP:$112.20You Save: $40.85 (37%)Product Specifications- Notes: Regal, Intrigue
- Other Names: Actuator, Lock Actuator, Lock Solenoid
- Item Dimensions: 8.2 x 3.0 x 3.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16632227
- Part Description: 2002 Buick Regal Lock Solenoid
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 6.3 x 3.2 x 3.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Latch
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
Product Specifications- Notes: Regal, Grand Prix; Left
- Location: Driver Side
- Other Names: Lock
- Item Dimensions: 6.4 x 3.1 x 3.2 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Lock
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
Product Specifications- Notes: Regal, Grand Prix; Right
- Location: Passenger Side
- Other Names: Lock
- Item Dimensions: 6.2 x 3.2 x 3.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Lock
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
Product Specifications- Notes: Regal, Grand Prix; Left
- Location: Driver Side
- Other Names: Latch, Lock
- Item Dimensions: 7.8 x 4.6 x 4.6 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16629717
- Part Description: 2002 Buick Regal Rear Door Latch Actuator
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for Door Lock Repair
Q: What is the recommended torque for the door lock screws?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the lock cylinder in the door?
A:
You need to remove the outside handle, the lock cylinder retainer clip, and the lock from the handle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the lock in the front door?
A:
You need to remove the trim panel, the water deflector, the inside handle rods from the handle, and the clip securing the inside handle rods to the door, cut off the outside handle rod-to-lock clip, unscrew the remainder of the clip, remove the screws securing the lock to the door, disconnect the electrical connectors, and remove the inside handle rods.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the lock in the rear door?
A:
You need to remove the trim panel, the water deflector, the outside handle rod, the inside handle rods, the clip securing the inside handle rods to the door, the door lock screws securing the lock to the door and the lock, disconnect the electrical connectors, and remove the inside handle rods from the lock.
By Bob
GM Specialist
01/11/2022Q: How to install the lock cylinder in the door?
A:
You need to install the lock to the handle, the lock cylinder retainer clip, and the outside handle.
By Bob
GM Specialist
01/11/2022