< Back ×
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2002 Buick Regal Temperature Door Actuator
PartNumber: 89018365
Product Specifications- Notes: Electric;Electric, Auto Control; All Models
- Item Dimensions: 4.4 x 4.3 x 2.2 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16163982
- Part Description: 2002 Buick Regal Temperature Door Actuator
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
$171.22 MSRP:$323.08You Save: $151.86 (48%)
Dorman® Hvac Air Door Actuator for 2002 Buick Regal
PartNumber: 604-106Product Specifications- Notes: Temperature; w/RPO Code CJ2 (Front Auto Temperature Controls); Packaging Type: Box
- Material: Plastic
- OE Part Number: 16163982, 52402588, 52402598, 52402612, 89018365
- Package Contents: Actuator
- Switch Activation Type: Rotary
- UPC: 019495143840
- Part Description: 2002 Buick Regal Hvac Air Door Actuator
Vehicle Fitment- 2002 Buick Regal | All Trims | All Engines
$95.94
Four Seasons® Hvac Heater Blend Door Actuator for 2002 Buick Regal
PartNumber: 37537Product Specifications- Notes: w/ ATC
- Door Linkage: Female
- Mounting Ear Qty.: 3
- Style: Temperature Blend Actuator
- Terminal Pin Qty.: 5
- UPC: 096361375376
- Wire Quantity: Not Applicable
- Part Description: 2002 Buick Regal Hvac Heater Blend Door Actuator
Vehicle Fitment- 2002 Buick Regal | All Trims | 6 Cyl 3.8L
$41.92
OEM (Genuine) 2002 Buick Regal Actuator
PartNumber: 89018681
Product Specifications- Notes: Electric, Manual Control
- Other Names: Actuator, Controller
- Item Dimensions: 4.3 x 4.2 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89018395, 16177412
- Part Description: 2002 Buick Regal Actuator
Vehicle Fitment- 2002 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
$57.03 MSRP:$107.62You Save: $50.59 (48%)
Four Seasons® Hvac Heater Blend Door Actuator for 2002 Buick Regal
PartNumber: 37538Product Specifications- Notes: w/o ATC
- Door Linkage: Female
- Mounting Ear Qty.: 3
- Style: Temperature Blend Actuator
- Terminal Pin Qty.: 4
- UPC: 096361375383
- Wire Quantity: Not Applicable
- Part Description: 2002 Buick Regal Hvac Heater Blend Door Actuator
Vehicle Fitment- 2002 Buick Regal | All Trims | 6 Cyl 3.8L
$29.91
Dorman® Hvac Air Door Actuator for 2002 Buick Regal
PartNumber: 604-107Product Specifications- Notes: Temperature; w/RPO Code CJ3 (Front Manual Temperature Controls); Packaging Type: Box
- Material: Plastic
- OE Part Number: 16124932, 16177412, 89018395, 89018681
- Package Contents: Actuator
- Switch Activation Type: Rotary
- UPC: 019495143857
- Part Description: 2002 Buick Regal Hvac Air Door Actuator
Vehicle Fitment- 2002 Buick Regal | All Trims | All Engines
$22.48
OEM (Genuine) 2002 Buick Regal Actuator Asm, Mode Valve
PartNumber: 52487750
Product Specifications- Notes: Vacuum; Mode Valve; All Models
- Other Names: Actuator, Controller, Door Actuator
- Item Dimensions: 5.7 x 5.5 x 3.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 52482059
- Part Description: 2002 Buick Regal Actuator Asm, Mode Valve
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Actuator Asm, Air Inlet Valve
PartNumber: 52487607
Product Specifications- Other Names: Actuator
- Item Dimensions: 4.9 x 5.0 x 3.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Actuator Asm, Air Inlet Valve
Vehicle Fitment- 2002 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Actuator Asm, Defroster Valve
PartNumber: 52487593
Product Specifications- Notes: Defroster Valve; Defrost Valve; All Models
- Other Names: Actuator, Controller, Door Actuator
- Item Dimensions: 6.4 x 4.1 x 4.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 52472510
- Part Description: 2002 Buick Regal Actuator Asm, Defroster Valve
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for Hvac Heater Blend Door Actuator Repair
Q: How to install the defroster actuator?
A:
You need to install the defroster actuator to the defroster door arm and snap it into place on the HVAC module, connect the vacuum line to the actuator, remove the hand vacuum pump and reinstall the vacuum line to the recirculation actuator, and install the IP compartment and the right instrument insulator panel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the left air temperature actuator?
A:
You need to remove the left instrument panel insulator and the knee bolster, disconnect the electrical connector from the left air temperature actuator, and remove the mounting screws from the left air temperature actuator and the left air temperature actuator.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the mounting screws to the left air temperature actuator?
A:
The recommended torque is 1.5 Nm (13 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the right air temperature actuator?
A:
You need to position the right air temperature actuator, align the slots in the electric actuator driver to the flats on the shaft, align the locating hole to the alignment on the HVAC module case, slide the actuator driver onto the shaft, install the screws, connect the electrical connector to the right air temperature actuator, install the instrument panel compartment and the right side instrument panel insulator, and calibrate the actuator.
By Bob
GM Specialist
01/11/2022Q: How to install the mode actuator?
A:
You need to connect the actuator push rod to the mode door lever, position the actuator onto the slides of the HVAC module assembly, ensure that the lock tab locks the actuator, connect the vacuum lines to the mode actuator, and install the knee bolster bracket and the left side instrument panel insulator.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the recirculation actuator?
A:
You need to remove the instrument panel compartment and the right instrument panel insulator, disconnect the vacuum line, lift on the retaining tab, disconnect the vacuum actuator plunger rod, and remove the recirculation actuator.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the defroster actuator?
A:
You need to remove the right instrument panel insulator panel and the IP compartment, disconnect the two vacuum lines and the orange vacuum line, install a hand vacuum pump, remove the defroster actuator, open the recirculation actuator door, rotate the defroster actuator to the right and up into the opening, and disconnect the defroster actuator.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the mode actuator?
A:
You need to remove the left instrument panel insulator and the knee bolster bracket, disconnect the vacuum line from the mode actuator, lift the lock tab to remove the actuator, remove the mode actuator off the slides of the HVAC module assembly, disconnect the actuator pushrod from the mode door lever, and remove the actuator.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the right air temperature actuator?
A:
You need to remove the right side instrument panel insulator and the instrument panel compartment, disconnect the electrical connector from the right air temperature actuator and remove the screws which secure the right air temperature actuator and the electric actuator.
By Bob
GM Specialist
01/11/2022Q: How to install the recirculation actuator?
A:
You need to install the recirculation actuator, connect the vacuum actuator plunger rod, extend the plunger, push the vacuum actuator toward the HVAC control module case, connect the vacuum harness connector, and install the instrument panel compartment and the right instrument panel insulator.
By Bob
GM Specialist
01/11/2022See more FAQs (5)