< Back ×
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
Spark Plugs & Wires
- Department
- Brands
- Prices
Denso® Spark Plug Wire Set for 2002 Buick Regal
PartNumber: 671-6063Product Specifications- Notes: OE Replacement Part / Complete Ignition Wire Set - 7mm
- Distributor Coil End Terminal Type: Female
- Outside Diameter: 0.275"
- Spark Plug Boot End Angle: Straight
- Spark Plug Boot Material: Silicone
- Spark Plug End Boot Quantity Straight: 6
- Spark Plug End Terminal Type: Female
- UPC: 042511086944
- Wire Diameter: 7 mm
- Part Description: 2002 Buick Regal Spark Plug Wire Set
Vehicle Fitment- 2002 Buick Regal | All Trims | 6 Cyl 3.8L
$33.13
Delphi® Spark Plug Wire Set for 2002 Buick Regal
PartNumber: XS10392Product Specifications- Composite High Temp: Composite High Temperature
- Meets or Exceeds Original Equipment Manufacturing Specifications: Yes
- Spark Plug Boot End Angle: Straight
- UPC: 689604162620
- Part Description: 2002 Buick Regal Spark Plug Wire Set
Vehicle Fitment- 2002 Buick Regal | GS | All Engines
- 2002 Buick Regal | LS | All Engines
$33.34
Walker Products® Spark Plug Wire Set for 2002 Buick Regal
PartNumber: 924-1364Product Specifications- UPC: 724620170003
- Part Description: 2002 Buick Regal Spark Plug Wire Set
Vehicle Fitment- 2002 Buick Regal | All Trims | 6 Cyl 3.8L
$20.82
OEM (Genuine) 2002 Buick Regal Cable Set
PartNumber: 12192468
Product Specifications- Notes: 3.8L; Mfi;3.8L; Sfi
- Other Names: Cable Set
- Item Dimensions: 9.6 x 6.1 x 3.9 inches
- Item Weight: 1.00 Pounds
- Replaced by: 19417604
- Part Description: 2002 Buick Regal Cable Set
Vehicle Fitment- 2002 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
$55.19 MSRP:$104.15You Save: $48.96 (48%)OEM (Genuine) 2002 Buick Regal Cable Set
PartNumber: 19417604
Product Specifications- Notes: W/O Supercharger;W/Supercharger
- Other Names: Cable Set, Plug Wire Set
- Item Dimensions: 9.5 x 6.2 x 3.9 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12192191, 12192468, 12192454
- Part Description: 2002 Buick Regal Cable Set
Vehicle Fitment- 2002 Buick Regal | GS, LS, LSE | 6 Cyl 3.8 L GAS
$55.19 MSRP:$104.15You Save: $48.96 (48%)
OEM (Genuine) 2002 Buick Regal Harness
PartNumber: 15301403
Product Specifications- Notes: Camshaft Sensor
- Other Names: Harness
- Item Dimensions: 11.8 x 9.9 x 4.6 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Harness
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for Spark Plug Wire Repair
Q: What should we inspect for each boot?
A:
You should inspect each boot for tearing, piercing, arcing, carbon tracking, and corroded terminal.
By Bob
GM Specialist
02/11/2022Q: What is the procedure to remove the left engine mount strut?
A:
The procedure is to remove the bolt and the nut from the left engine mount strut at the left engine mount strut bracket, the bolt and the nut from the left engine mount strut at the left engine mount strut bracket, and the engine mount strut.
By Bob
GM Specialist
02/11/2022Q: What are the recommended torque for the left engine mount strut bracket nuts and stud?
A:
The recommended torque is 50 Nm (37 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the procedure to remove the fuel injector sight shield?
A:
The procedure is to twist counterclockwise to unlock the tube/oil fill cap from the valve cover, remove the upper intake manifold cover nut holding the fuel injector sight shield to the fuel injector rail brace stud, lift the fuel injector sight shield up at the front and slide the tab out of the engine bracket, and re-install the tube/oil fill cap in the valve cover to prevent engine oil contamination.
By Bob
GM Specialist
02/11/2022Q: What is the inspection procedure for the spark plug wire?
A:
The procedure is to inspect for correct routing of the spark plug wires, each wire for any signs of cracks or splits between the wire and each boot.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the spark plug wire?
A:
You need to turn OFF the ignition, remove the fuel injector sight shield, the spark plug wires from the spark plugs at the rear and front of the engine, remove the spark plug wires from the ignition coils, remove the spark plug wire retaining clips from the rear, front and top of the engine, and remove the spark plug wires from the engine.
By Bob
GM Specialist
02/11/2022Q: What is the procedure to remove the spark plug wires at the front of the engine?
A:
The procedure is to note the position of the spark plug wires before removing the wires, twist the spark plug boot 1/2 turn before removing the boot, pry the heat shield up from the spark plugs, and remove the spark plug wires from the spark plugs at the front of the engine.
By Bob
GM Specialist
02/11/2022See more FAQs (2)